iNSTALLATiON AND SERVICE MUST BE PERFORMED BY A QUALiFiED iNSTALLER.
iMPORTANT: SAVE FOR LOCAL ELECTRICAL iNSPECTOR'S USE.
READ AND SAVE THESE iNSTRUCTiONS FOR FUTURE REFERENCE.
For existing 29" (73.7 cm) cutout wide opening, you must
call the Service Center for optional thinner side panels.
Also you must prepare the countertop edge as shown in
the "Countertop Preparation" section (see page 7).
These surfaces shouJd be flat &
leveled (hatched area),
ShaveRaised Edge
To Clear
Spacefor
31 5/16"
(81cm)
Wide
Cooktop Rir
1 Y/' Max.
(3.8 cm Max.)
30" Min.
(76.2 cm) Min. ,
J
30" Min.l(see Note 3) __
(76.2 cm) Min. (See Note 3) |
18" Min.
Min. (45.7 cm) Min.
Locate Cabinet Doors 1" (2.5 cm) Min.
From Cutout Opening
Grounded Junction Box or Wall Outlet Should
Located 8" to 17" (20.3 - 43.2 cm) From Rig
Cabinet and 2" to 4" (5.1-10.2 cm) From Floor
IMPORTANT: Cabinet and countertop width
shouJd match the cutout width,
E
E
Do not instalJ the unit in the cabinet before reading next two pages.
A. HEIGHT
(Under Cooktop)
35 518" (90.5 cm) -
36 518" (93 cm}
B.WIDTH
30"
(76,2 cm)
Printed in United States
C.¸
COOKTOP D. TOTAL DEPTH
WIDTH TO FRONT OF
• RANGE
31 5/I6" 28 5/I6" (71,9 cm)
(79.5 cm)
IE;CUTOUT WIDTH*** F. CUTOUT ' G: HEIGHT
_Countertop DEPTH OF COUNTERTOP
and cabinet) "
30±1/I 6" 21 3/4" (55,2 cm} Min. 36 5/8" (93 cm) Max.
(76,2±0,15cm) 22 118" (56,2 cm) Max 35 518" (90.Scm}Min.
24" (61 cm) Min. with
backguard
P/N 318201610 (0604) Rev. D
English - pages 1-12
EspaF_ol- paginas 13-24
Loading ...
Loading ...
Loading ...
