Loading ...
Loading ...
Loading ...
10
Wash Cycle Options
Delay Start: Allows you to delay the start time of your dishwasher in one hour increments up to 24 hours.
Eco: Lowers temperature and cycle length to decrease energy usage.
Half Load: In the Heavy, Auto, Normal, Delicate and Glass Care wash cycles, the Half Load option can
reduce the energy and water consumption when washing small, lightly soiled loads that fill approximately
half of the dishwasher’s capacity. To activate, select the Half Load button in addition to any of the three
cycles listed above.
Extra Wash: This cycle option can be selected to increase wash performance with more water used in
extra sequences and at higher temperatures.
Sanitize Option: The Sanitize feature is available only in the Heavy, Auto and Normal cycles. Press the
“Sanitize Option” button to activate the Sanitation features during the Auto and Normal cycles. The
Sanitize light will always be on when running a Heavy cycle. The technical sanitation measures may also
improve the drying results.
Note: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option
in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.
Wash Cycle Information
The cycle times in this Use and Care Manual are based on normal soil loads and 120°F incoming water and will vary
based on your actual conditions.
Note: Only sanitizing cycles have been designed to meet the requirements of 6 for soil removal and sanitization effi-
cacy. There is no intention, either directly or indirectly, that all cycles have passed sanitization performance tests.
Operating the Dishwasher
Start the dishwasher
1 Open the door and press the [On/Off] button. The LED of the last selected cycle flashes.
2 Select a cycle and desired options.
3 Press [Start] and close the door.
Cancel a cycle
1 Open the door and press and hold the [Start] button for approximately 3 seconds until the display
reads “0:01”.
2 Wait about 1 minute while the dishwasher drains.
3 Open the door and press the [On/Off] button.
Interrupt a cycle
1 Open the door and press the [On/Off] button to turn the unit off.
2 To resume the cycle, press the On/Off button again and close the door.
Table 3 - Wash Cycle Information
Heavy Auto Delicate Normal Express Glass Care
cycle time 110-135 min 105-129 min 80-85 min 95-119 min 30 min 70 min
cycle time with Half Load option 115 min 95-105 min 75-80 min 90-99 min not available 65 min
cycle time with Sanitation option 125-145 min 120-140 min not available 115-130 min not available not available
cycle time with Extra Wash option 145 min 120-140 min 95-105 min 115-135 min not available 85 min
water consumption 18.1-23.7 L
4.8-6.3 gal
13.1-24.9 L
3.5-6.6 gal
8.8-13.9 L
2.3-3.7 gal
5.8-16.9 L
1.5-4.5 gal
10.3 L
2.7 gal
12.9 L
3.4 gal
wash temperature 66-71°C
150-160°F
55-66°C
130-150°F
45-50°C
113-122°F
50-55°C
122-131°F
45°C
113°F
50°C
122°F
rinse temperature 72°C
162°F
70°C
158°F
63°C
145°F
51-69°C
124-156°F
50°C
122°F
60°C
140°F
Loading ...
Loading ...
Loading ...