Loading ...
Loading ...
Loading ...
5
STEAM IRONING
1. To steam iron, set the temperature control to S or higher.
2. Set the steam control to the setting you want, S = no steam, S=high steam.
3. Wait till the light goes out, then start ironing.
SPRAY
Water spotting aects some fabrics. Test this out on a hidden part of the fabric.
1. Lift the iron o the fabric.
2. Aim the spray nozzle at the fabric.
3. Press the * button – you may have to press it 2 or 3 times to pump water through the
system.
SHOT OF STEAM
1. Check that the temperature control is at S or higher.
2. Lift the iron o the fabric.
3. Press the
h
button.
4. Leave 4 seconds between shots to let the temperature build up.
DRY IRONING
1. If you’re going to be dry ironing for 20 minutes or more, empty the reservoir rst to avoid
spontaneous bursts of steam.
2. Set the steam control to S.
3. Set the desired temperature.
4. Wait till the light goes out, then start ironing.
VERTICAL STEAMING
Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
• Check that there’s adequate ventilation behind the fabric, otherwise moisture may build up,
causing mildew.
• Check that there’s nothing behind the fabric that may be damaged by the steam.
• Check that pockets, turn-ups, and cus are empty.
• Check that there’s water in the reservoir.
1. Set the temperature control to max and set the steam control to S.
2. Hold the iron close to (but not touching) the fabric.
3. Press the
h
button.
• Leave 4 seconds between shots, to let the temperature build up.
Loading ...
Loading ...
Loading ...