Loading ...
Loading ...
Loading ...
Operating the cooktop
43
Fire hazard!
Do not leave the appliance unat-
tended while cooking!
Turning on
Do not turn the control knob clockwise
past the "Off" position.
Activating a control knob automati-
cally produces a spark on all of the
burners. This is normal and does not
indicate a fault.
You may notice a brief re-ignition
(1-2clicks) when turning on the appli-
ance, e.g. because of a draft.
To ignite a burner, push the appropri-
ate control knob and turn it counter-
clockwise to the "High" position. The
ignitor "clicks" and ignites the gas.
If the burner fails to light, turn the
control knob to the "Off" position.
Vent the room or wait at least 1
minute before trying again.
If the second attempt also fails to
light the burner, turn the control knob
to the "Off" position and refer to the
"Frequently asked questions" section.
Switching on during a power
outage
If there has been a power failure,
the automatic re-ignition feature will
not work properly.
Operate the cooktop only under su-
pervision. If the burner has not ig-
nited or the flame goes out, turn off
the burner knob.
Simmer and power burners
In case of a power failure, the flame
can be ignited manually.
Press in the burner knob and turn it
counterclockwise to "High."
Light the emerging gas/air mixture
with a match.
Grill
Danger of injury due to the man-
ual ignition of the ceramic burner
during a power failure!
Never operate the grill during a
power failure.
Turn off the grill control knob.
Griddle plate
The griddle plate cannot be operated
in case of a power failure.
Turn off the control knob for the grid-
dle plate.
Loading ...
Loading ...
Loading ...