Loading ...
Loading ...
Loading ...
9
LIGHT
The interior light makes it easy to view your items. Touching the LIGHT symbol toggles between 2
modes of operation for the internal lights: functional (default) mode and showcase mode. If you are
in functional (default) mode, the lights will turn on only when the door is open. If you are in
showcase mode, the lights will be on whether or not the door is open.
ºF/ºC SELECTOR
Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
SETTING THE TEMPERATURE CONTROL
You can set the temperature by touching the UP and DOWN symbols. When you push either of
the two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F (3°C).
The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
The range of the temperature control is from 36°F to 43°F.
To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
DYNAMIC COOLING MODE
When your appliance is first turned on, it operates in the Silent (or Energy-Saving) mode. If it is important
that the interior temperature of the unit be the same throughout the storage cabinet, you should switch to
the Dynamic Cooling mode. This causes the interior fan to circulate the inside air evenly, even after the
set temperature is reached.
To switch to Dynamic Cooling, press the DOWN symbol for about 5 seconds. You will hear 5 beeps to
confirm that Dynamic Cooling is in effect. The unit will remain in this mode until you turn it off or until the
unit loses power. To revert to Silent mode, press the UP symbol for 3 seconds; 3 beeps will confirm the
change.
You can tell whether your unit is in Dynamic Cooling or Silent mode by the sound of the
internal fan motor. When the compressor is OFF, if the internal fan motor is working, the unit is
in Dynamic Cooling mode, but if the internal fan motor is also OFF, the unit is working in Silent
mode.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
NOTE:
If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
Loading ...
Loading ...
Loading ...