Loading ...
Loading ...
Loading ...
Page:
6
User Manual:
DEFROSTING YOUR CHEST FREEZER
→ For the most ecient operation and minimum energy consumption, defrost the freezer
when the frost on the freezer walls is excessive or 5 to 10 mm thick. To minimize
disruption, choose a time when the stock of frozen food is low.
Important! Do not use boiling water because it may damage the plastic parts. In
addition, never use a sharp or metallic instrument to remove frost as it
may damage the cooling coils and will void the warranty. We recommend
using the plastic scraper provided with your unit.
→ Remove the frozen food from the freezer and place it in a cooler to protect the food.
→ Unplug the freezer. The Power Supply light should be o (green light out).
→ During defrosting, the ice melts into the cabinet.
→ Remove the drain plug on the inside oor of the freezer by pulling straight out.
→ Place a shallow pan outside drain outlet. The defrost water will drain out.
→ Check the pan occasionally so the water does not overow.
→ Clean the interior of the freezer.
→ Replace the plug on the inside oor.
→ Reset the thermostat to desired setting.
→ Allow the cabinet to cool for one hour.
→ Switch on the temperature control to the highest setting for two hours before using,
and then adjust to normal level.
→ Return food to the freezer.
Helpful Tip. Defrosting usually takes a few hours. Leaving the door open will help
speed the process. Also, pouring warm water (not boiling) on the ice/frost
will help speed melting. If you must use a scraper- please use caution - it
is very easy to damage the freezer compartment and void your warranty.
Cleaning and Maintenance
By ensuring proper cleaning and maintenance of your Esatto Chest Freezer,
you can ensure that it will have a long and fault free operation.
CLEANING YOUR CHEST FREEZER
→ Warning! To avoid an electric shock, always unplug your freezer before cleaning. Ignoring
this warning may result in death or serious injury.
Caution. Before using any cleaning products, please read and follow the
manufacturer’s instructions and warnings to avoid any damage to your
Chest Freezer or personal injury.
→ Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
→ Wash the inside with a damp warm cloth containing a water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to 2L of water.
→ Wash the storage basket with a mild detergent solution.
→ Be sure to keep the door seal clean to keep the unit running eciently.
→ The outside of the freezer should be cleaned with mild detergent and warm water.
→ Dry the interior and exterior with a soft cloth.
→ The condenser coils should be carefully vacuumed when they are dusty or dirty.
→ It is recommended that the unit be cleaned each time it is defrosted to help keep the unit
odour free and running eciently.
→ Clean your door gasket seals every 3 months using the same warm water solution
described above.
Loading ...
Loading ...
Loading ...