Loading ...
Loading ...
Loading ...
5
en
Using the product
If this happens, switch off your mixer
grinder and remove the excess ingredients.
Add sufficient water if dealing with thick
paste and wait for 2-3 minutes. Press the
red reset button and start the mixer grinder
again.
Operating your mixer
grinder
Before using for the first time /
using after a long time
■ Before using the mixer grinder for the
first time or using it after a long time,
thoroughly clean all the parts that come
into contact with food ingredients.
■ Rotate the motor shaft by hand via the
motor coupler, on top of the main unit.
The motor shaft should rotate freely.
■ Check that the speed selector is in the
OFF position.
■ Place the main unit on a smooth, stable
and clean surface.
W Caution!
Never place plastic, paper or cloth under
the mixer grinder as it may block the
ventilation holes.
■ Connect the main plug to the wall
socket. Switch on the main supply
and turn the speed selector knob to
the required position and speed. After
operation, turn the speed selector knob
to the OFF position and check. Repeat
until the desired results are obtained.
Using the product
How to fit jar to main unit
Carefully insert the jar on top of the main
unit. Ensure that the lock of the jar fits into
the slot of the main unit. Rotate the jar
clockwise until it locks and use the handle
to lock.
How to tighten blade
Hold the coupler on the underside of the jar
and with the spatula, tighten by rotating in
an anti-clockwise direction.
tighten
Safety systems
The Bosch TrueMixx Mixer Grinder is
fitted with an overload protector (OFF)
mechanism to prevent the motor burning
out due to overloading. In case of excess
loading with ingredients in the jar, very thick
paste or low voltage conditions, your Bosch
mixer grinder automatically switches off and
the red knob on the bottom of the mixer
grinder will spring out.
Loading ...
Loading ...
Loading ...