Loading ...
Loading ...
Loading ...
134
*
[FV37301( E )05/89]
To install the seat assembly:
[FV37401( E )06/92]
1. Place the seat assembly in the vehicle.
[FV37501( E )06/92]
2. Align the front stanchion hooks to the front
latch strikers in the floor prior to lowering
the seat’s rear stanchion hooks and aligning
them with the rear latch strikers in the floor.
[FV37601( E )06/92]
3. Engage the LH/RH latch rod hook ends in
the front striker locking holes.
[FV37701( E )06/92]
4. Rotate the LH/RH latch handles forward,
and at the same time, slide the seat assembly
forward to engage the floor strikers.
Continue forward movement until it reaches
the end of its travel.
[FV37801( E )06/92]
5. Before you engage the lap/shoulder safety
belt to the seat, make sure the belt is not
twisted. A twisted belt may cause the
retractor to not work properly. Remove any
twist, then insert the tongue end of the
detachable anchor into the detachable anchor
until you hear a “snap” and feel the latch
engage. Refer to the previous illustration.
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Loading ...
Loading ...
Loading ...