Loading ...
Loading ...
Loading ...
Right side of vehicle: rotate the bulb holder
to the left and remove.
3. Disconnect plug and replace bulb.
4. Install in the reverse order.
Side marker lamps
The illustration shows the left side of the engine
compartment.
5-watt bulb, WY5W XLL
1.
Rotate the bulb holder to the left and re‐
move.
2. Pull the bulb out of the bulb holder and re‐
place.
3. Install in the reverse order.
LED headlamps
Follow the general instructions on lamps and
bulbs, refer to page 288.
With LED headlamps, the following lamps are
designed with LED technology:
▷ Low beams/high beams
▷ Adaptive Light Control
▷ Parking and roadside parking lamps
▷ Daytime running lights.
▷ Side marker lights.
Contact your service center in the event of a
malfunction.
Turn signals, front
Follow the general instructions on lamps and
bulbs, refer to page 288.
The illustration shows the left side of the engine
compartment.
24-watt bulb, PY24W
1. Rotate bulb holder to the left and remove it
along with the bulb.
2. Rotate the bulb to the right along with the
socket and replace.
3. Install in the reverse order.
Fog lamps
Follow the general instructions on lamps and
bulbs, refer to page 288.
Contact your service center in the event of a
malfunction.
Tail lamps
▷ Turn signal, backup lamp: 21-watt bulb,
H21W.
▷ Brake lamp, brake force display: 21-watt
bulb, P21W
▷ Tail lamp: LED technology.
Contact your service center in the event of a
malfunction.
Seite 293
Replacing components Mobility
293
Online Edition for Part no. 01 40 2 901 891 - 03 12 500
Loading ...
Loading ...
Loading ...