Loading ...
Loading ...
Loading ...
3232
Care and maintenance
How to dismantle parts
Care
(
(
(
(
R
(
Separate the lamp by pulling it out③while
slightly pressing ①and rotating ②the lamp cover.
Turn the bulb counterclockwise. Use a 40-watt
bulb(max.) which can be purchased at a service
centre.
To remove the lamp cover, press the protrusion under the lamp cover to the
front and then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb or LED for refrigerator is
used and can be purchased at a service centre.
Refrigerator
compartment
lamp
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
(Applicable to
some models only)
After dispenser is
used
(Applicable to
some models only)
NOTE
t%JTNBntle by revFSTJOHUIFBTTFNCMZJOTUSVctionT. BFTVre tPVOQMVHUIFQower
QMVHCFforFEJTNBnUMJOHBOEBTTFNCMy. NevFSBQQMZTFvere force tPEJTNBntle
QBrtT. ParUTNaZCFEBNBHFd.
NOTE
t/PUBMMCVMCTXJMMöUyPVSrefrJHFrator.
BFTVre to rFQMBcFUIFCVMCXJMMPOFPGUIFTBNFTJzeTIBQFBOEwaUUBHe.
t TIFEJTQFOTFSMJHIUTBrF-&%TUIaUDBOOPUCFDIBOHFd.
To remove a shelf, push the shelf to the left
②,lift the left part of the shelf a bit ①, lift the right
part up ③, and take it out.
Lift the door rack holding both sides ①and pull
it out
②.
Hold the ice storage bin as shown in the right
figure and pull it out ②while slightly lifting it ① .
is necessary.
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
OPTION 1
First take out the water collector cover.
Press the cover where PUSH marked ① to
lift the water collector cover up.
Take out the water collector cover as
illustrated ②.
OPTION 2
Remove the cover by pulling the front side
of water collector cover and dry it with a
cloth.
Pull the cover fully to the front ① and pull
it out. ② Clean the base and cover with a
dry cloth.
ENGLISH
Loading ...
Loading ...
Loading ...