Loading ...
Loading ...
Loading ...
- 16 -
➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ Replace full bag if necessary.
➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Thermal Protector
NOTE: To reduce the risk of electrical shock, this vacuum cleaner has a polarized
plug, one blade is wider than the other. This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. DO NOT CHANGE THE
PLUG IN ANY WAY. Only use outlets near the floor.
Power Cord
TO OPERATE VACUUM CLEANER
Loading ...
Loading ...
Loading ...