Loading ...
Loading ...
Loading ...
20
Daily Maintenance
Clean with a damp, well-wrung cloth.
Do not wet or soak the main unit in water.
If water enters the main unit from the bottom or from the dispensing
spout, it can also get into the electrical components in the main unit
and may cause a malfunction.
Main unit and lid
Clean the lter with a brush.
When lter is clogged, water does not ow
smoothly.
* After cleaning the lter, be sure to reattach it to
the inner container.
Mesh lter
Clean with a wet soft sponge.
Do not use polishing
powder, a scrub brush
or a nylon brush.
About "Scale"
While you are using this unit, minerals contained
in the water (like calcium) can get stuck on the
inner container or on the mesh lter. This is
called "scale", and it is harmless.
Milky-white gritty surface (caused by calcium)
White or glittering oating material
(crystals of minerals)
Discoloration in the nish like dark brown, gray,
or green areas
(metallic ion made on the uororesin covering)
These are not discoloration or corrosion of the
inner container itself, nor are they akes from the
uororesin covering.
Clean the inner container using
citric acid. (See P.21)
Inner container
When storing the unit
Dry it thoroughly.
Put it into a plastic bag and seal the bag to
keep insects from getting in.
Do not use detergents.
(They may leave an odor.)
Do not use benzine or thinner.
(They may damage the surface.)
Before cleaning, be sure to disconnect the power plug
from outlet, dispense water and cool down the unit.
They may damage the uororesin
nish of the inner container.
APB97-480-0U
Daily Maintenance
06_USA_OM_NC-EG2200_3000_4000_EN.indd 2006_USA_OM_NC-EG2200_3000_4000_EN.indd 20 12/14/2558 BE 15:5012/14/2558 BE 15:50
Loading ...
Loading ...
Loading ...