Loading ...
Loading ...
Loading ...
GB
Interpretation of VISIO CONTROL
Losing or gaining weight can be considered as a good thing or a bad thing:
In fact, you can lose weight by losing fat mass, which is a positive development for your weight. But
you can also lose weight by losing muscle, which is a negative development for your weight. You can
also gain weight by gaining fat mass, which is a negative development, but you can also gain weight
by gaining muscle, which is a positive development.
If your weight does not vary or if your variations are insignificant, your are considered as
being stable.
• Weight loss:
either a loss of fat mass.
or a loss of muscle.
• Weight gain:
either an increase
in muscle.
or an increase in
fat mass.
• Stability:
stable.
Your diet and/or exercise are having a
healthy effect on your body make-up.
Modify your diet, with emphasis on compound
carbohydrates and physical exercise.
Your physical activity is having a healthy
effect on your body make-up.
Modify your diet, which is probably out of
balance, emphasising fruits and vegetables,
reduce your sugar and fat consumption and
why not take up a sport?
Your body make-up is stable.
If you want to modify your body make-up,
see the previous indications.
➪
➪
➪
➪
➪
Recommendations for use
To obtain complete satisfaction from this appliance, it must be used as follows:
• You should always weigh yourself under the same conditions, preferably once a week, in
the morning (so as not to take into account the body’s fluctuations during the day related to
food, digestion or physical activity), 15 minutes after you get up, so that the water in your body
has time to be distributed in your lower limbs.
• Do not weigh yourself after physical effort. Wait 6 to 8 hours for a significant weight
measurement or weigh yourself before the effort.
• You MUST be barefoot when weighing yourself (direct contact with the skin).
Your feet must be dry and positioned properly on the electrodes.
• It is important to make sure that there is no contact:
- between your legs (thighs, knees, calves), between your feet.
If necessary, slide a sheet of paper between your legs.
Changing your personal characteristics
(age or height of children, for example)
BodySignal is switched off.*
1- Press once on ENTER.
2- Press on
<
or
>
to select your memory.
3- Press on ENTER for 5 seconds until the little person starts to flash.
4- The little person flashes: If you want to change the sex, press on
<
or
>
, then once on ENTER
.
Otherwise, press once on
ENTER.
5- The age flashes: If you want to change the age, press on
<
or
>
, then once on ENTER.
Otherwise, press once on
ENTER
.
6- The height flashes: If you want to change the height, press on
<
or
>
, then once on ENTER.
Otherwise, press once on
ENTER.
The results of your previous weighing will be redisplayed automatically, and then
BodySignal switches off.
Clearing a memory
BodySignal is switched off.*
1- Press once on ENTER.
2- Press on
<
or
>
to select the memory.
3- Now press on the
CLEAR key for 5 seconds.
4- Clr is displayed.
5- All the data in the selected memory are erased.
6- Wait for the appliance to switch off before weighing yourself again.
* BodySignal Glass needs to be activated to access this function. For this, step on the scales, wait for the complete
display of your personal data before stepping off the scales and pressing on CLEAR, then continue the process from step 2.
VISIO CONTROL is green
VISIO CONTROL is pink
VISIO CONTROL is green
VISIO CONTROL is pink
VISIO CONTROL is orange
When the 0 flashes to indicate the memory number, this means that there is no more
free memory space. Clear one of the 4 memories and re-enter your parameters.
NB : VISIO CONTROL lights up completely when the batteries
are changed and after you weigh yourself for the first time to
indicate that your personal data have been recorded in the
memory.
Loading ...
Loading ...
Loading ...