Loading ...
Loading ...
Loading ...
21
6. Press Cycle Signal (Alarma Fin de
Ciclo) to begin cycle
Push and hold the Cycle Signal knob to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Prevention feature to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
Prevención de Arrugas
Wrinkle Prevention
Yes
No
4. Set cycle settings
Select cycle settings by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE (TEMPERATURA)
Turn Temperature knob to change the drying temperature
setting. See “Setting Drying Temperature”.
WRINKLE PREVENTION (PREVENCIÓN DE ARRUGAS)
FEATURE (ON SOME MODELS)
■ Get 90 minutes of heat-free, periodic tumbling at the
end of a cycle. Turn the Wrinkle Prevention knob to
select Yes or No at any time before the cycle has ended.
■ On some models with a Wrinkle Prevention, cycle will
automatically get 40 minutes of heat-free, periodic
tumbling at the end of a cycle.
3. Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide”
for more information about each cycle.
AUTOMATIC CYCLES (CICLOS AUTOMÁTICOS)
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Jeans or Muy Seco (Very Dry) or Delicado (Delicate)
or Menos Seco (Less Dry) automatically adjusts the dryness
level at which the dryer will shut off. Once a dry level is set, it
cannot be changed without stopping the cycle.
Automatic Cycles (Ciclos Automáticos) give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Jeans or Muy Seco (Very Dry) removes more load
moisture.
5. Select Cycle Signal (Alarma Fin
de Ciclo) if desired
Turn the Cycle Signal knob to select the desired setting
(Yes or No). The Cycle Signal alarm produces an audible
sound when the drying cycle is nished. Promptly removing
clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Prevention setting is selected and
the Cycle Signal is On, the tone will sound every 5 minutes
until the clothes are removed, or the setting remaining time
ends.
13-Apr-2018 09:19:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...