User Manual - Page 136

For 2014 CONVERTIBLE W/ MINI CONNECTED.

Loading ...
Loading ...
Loading ...
Navigation system
Vehicle equipment
This chapter describes all series equipment as
well as country-specific and special equipment
offered for this model series.Therefore, it also
describes equipment that may not be found in
your vehicle, for instance due to the selected
special equipment or the country version. This
also applies to safety-related functions and sys‐
tems.
General information
The navigation system can determine the pre‐
cise position of the vehicle, with the aid of sat‐
ellites and vehicle sensors, and can reliably
guide you to every entered destination.
Entries in stationary vehicle
Enter data only when the vehicle is sta‐
tionary, and always give priority to the applica‐
ble traffic regulations in the event of any con‐
tradiction between traffic and road conditions
and the instructions issued by the navigation
system. Failure to take to this precaution can
place you in violation of the law and put vehicle
occupants and other road users in danger.
Opening the navigation system
1.
"Navigation"
During destination guidance, the arrow or map
view appears on the Control Display.
Navigation data
Information on navigation data
1. "Navigation"
2. Open "Options".
3. "Navigation system version"
Information is displayed on the data ver‐
sion.
Updating the navigation data
General information
Navigation data are stored in the vehicle and
can be updated.
Current navigation data and the authorization
code are available from your service center.
Depending on the data volume, a data up‐
date may take several hours.
Update during the trip to preserve battery.
The status of the update can be viewed.
The data are stored in the vehicle.
After the updating process is complete, the
system restarts.
Remove the medium with the navigation
data after the update.
Performing the update
1.
Depending on the equipment: insert the
USB device with the navigation data into
the USB interface in the glove compartment
or in the USB audio interface.
2. Follow the instructions on the Control Dis‐
play.
3. Enter the authorization code of the USB de‐
vice with the navigation data.
4. Drive off.
The update starts after the authorization code
is entered.
Seite 136
Navigation
Navigation system
136
Online Edition for Part no. 01 40 2 911 498 - VI/13
Loading ...
Loading ...
Loading ...