Loading ...
Loading ...
Loading ...
15
Preparation
Refrigerator/Freezer
Leveling
This model has 4-point leveling. All 4 corners
are supported by leveling legs. The front wheels
are non-adjustable; they are only used for
positioning the unit.
• To level the back of the unit, turn hex nut
located above the front wheels.
• To level the front of the unit, use a 1
1
⁄4″open
end wrench and adjust the leveling legs.
• Turn hex nut or front leveling leg clockwise
to raise the unit, counter-clockwise to lower
the unit.
See the Installation Instructions (Pub. No.
49-60073) for complete directions.
Refrigerator/
freezer
location
Do not install the refrigerator/freezer where
temperatures will be below 60°F (16°C) because
it will not run often enough to maintain proper
temperatures.
Do install it on a floor strong enough to support
a fully loaded refrigerator/freezer.
Clearances
If the refrigerator/freezer is to be installed in a
corner, a 4″clearance is required on the hinge
side for a 90° door opening and access to fresh
food drawers. A 10″clearance is required on the
hinge side to remove pans.
No other clearances at top, sides or back are
required.
Hex Nut
Wheel
Leveling Leg
Loading ...
Loading ...
Loading ...