Loading ...
Loading ...
Loading ...
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT Save these
instructions for local inspector’s use.
IMPORTANT Observe all
governing codes and ordinances.
• Note to InstallerBe sure to leave these
instructions with the Consumer.
• Note to ConsumerKeep these instructions
for future reference.
• Skill level Installation of this appliance
requires basic mechanical skills.
• Completion time
Approximately 1 hour
• Werecommendthattwopeopleinstall
this product.
• Properinstallationistheresponsibility
of the installer.
• Productfailureduetoimproperinstallation
isnotcoveredundertheWarranty.
• YouMUSTuseallsuppliedpartsanduse
proper installation procedures as described
in these instructions when installing this air
conditioner.
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca
Installation Air Conditioner
Instructions
Some models require a 115/120-volt AC,
60-Hz grounded outlet protected with a
15-amp time-delay fuse or circuit breaker.
The3-pronggroundingplugminimizesthe
possibility of electric shock hazard. If the wall
outlet you plan to use is only a 2-prong outlet,
it is your responsibility to have it replaced with
aproperlygrounded3-prongwalloutlet.
Somemodelsrequire230/208-voltAC,
protected with a time-delay fuse or circuit
breaker.Thesemodelsshouldbeinstalled
on their own single branch circuit
for best performance and to prevent
overloading house or apartment wiring
circuits, which could cause a possible fire
hazard from overheating wires.
ELECTRICAL REQUIREMENTS
CAUTION:
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
Do not change the plug on the power cord
of this air conditioner.
Aluminum house wiring may present special
problems—consult a qualified electrician.
8
TOOLS YOU WILL NEED
Phillips-headscrewdriver
Ruler or tape measurePencil
Level
Scissors or knife
Flat-blade screwdriver
Powercordincludesacurrentinterrupter
device. A test and reset button is provided on
theplugcase.Thedeviceshouldbetestedona
periodic basis by first pressing the TEST button
and then the RESET button while plugged into
the outlet. If the TEST button does not trip or
if the RESET button will not stay engaged,
discontinue use of the air conditioner and
contact a qualified service technician.
Loading ...
Loading ...
Loading ...