Loading ...
Loading ...
Loading ...
10
Contents
Connections
Playback
Setup
Front Panel Rear Panel Remote
1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component
digital audio signals with a digital optical cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are
connected.
3. VIDEO IN jacks: Input the AV component video signals with an analog video
cable.
4. USB port: A USB storage device is connected so that music les stored in it
can be played. ( p51) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
5. COMPONENT VIDEO IN jacks: Input the AV component video signals with a
component video cable. (Compatible only with 480i or 576i resolution.)
6. NETWORK port: Connect to the network with a LAN cable.
7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH
enabled device. Adjust their angles according to the connection status.
8. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable
connected to a TV.
9. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable
connected to an AV component.
10.
RS-232C port: Connect a home control system equipped with an RS-232C
port. For adopting a home control system, contact the specialized stores.
11.
AC IN: The supplied power cord is connected.
12.
SIGNAL GND terminal: The ground wire of the turntable is connected.
13.
AUDIO IN jacks: Input AV component audio signal with an analog audio cable.
14.
SPEAKERS terminals: Connect speakers with speaker cables. (North
American models support banana plugs.)
15.
ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio
cable to a premain amplier or a power amplier in a separate room (ZONE 2).
16.
SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a
subwoofer cable. Up to two powered subwoofers can be connected. The same
signal is output from each of the SUBWOOFER PRE OUT jacks.
17.
IR IN port: Connect a remote control receiver unit. ( p39)
18.
12V TRIGGER OUT jack: Connect a device equipped with a 12V trigger input
jack to enable power link operation between the device and this unit.
( p40)
Loading ...
Loading ...
Loading ...