Loading ...
Loading ...
Loading ...
16En
*1 Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 7).
*2 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 7).
PLAY
Start playback.
STOP
Stop playback.
OPERATE MODE
[CHANNEL], [REPLAY] Assign or buttons to select a channel
or skip backward/skip forward.
TUNE MIX
[ON], [OFF] Create a music channel that’s a blend of songs
m
ade up from the music channels stored on the
current band of presets.
TUNE SCAN
Scan through songs from your music channel
preset
s.
TUNE START
[ON], [OFF] Start playback of the broadcast from the
beginning of a song when tuning to a preset
music channel.
PARENTAL CTRL
[LOCKED CH] Lock the currently played channel that contains
ma
ture content.
[CLEAR ALL] Unlock all the channels that are restricted to
access.
[EDIT CODE] Change the passcode.
The default passcode is [0000].
AUDIO settings
Menu Item Description
FADER*1
*2
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
Menu Item Description
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80
HZ], [250HZ],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level:
[+6] to [–6]
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each source.
H
owever, each of the below combinations are set
to the same setting automatically.
• U
SB, iPod, PANDORA (iPhone), and APP
(iPhone)
• B
T AUDIO, PANDORA (Android), and APP
(Android)
[CUSTOM2] is a shared setting used for all
so
urces.
LOUDNESS
[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.
SUB.W*3
*4
[NOR], [REV], [OFF] Select the subwoofer phase.
SUB.W CTRL*3
*4*5
Cut-off frequency: [50
HZ],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Output level: [–24] t
o [+6]
Slope level: [–12
], [–24]
Only frequencies lower than those in the
s
elected range are output from the subwoofer.
BASS BOOST
[0] to [+6] Select the bass boost level.
HPF SETTING
Cut-off frequency: [O
FF], [50HZ],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Slope level: [–12
], [–24]
Only frequencies higher than the high-pass filter
(H
PF) cutoff are output from the speakers.
SLA
[+4] to [–4] Adjust the volume level for each source except
FM
.
Each of the below combinations are set to the
s
ame setting automatically.
• U
SB, iPod, PANDORA (iPhone), and APP
(iPhone)
• BT AUDIO, PANDORA (Android), and APP
(Android)
Menu Item Description
Loading ...
Loading ...
Loading ...