Loading ...
Loading ...
Loading ...
18
17
Common Operation/Radio Station/ Audio Input Operation:
At this time, the unit will display “LINE”.
If there are only 3 effective gures, please add 0
before the rst gure.
Radio Station Selection and Storing:
After operating the "Auto Search", the unit will
automatically store the radio station/s found in
sequence. After operating “manual search” or
“frequency-selecting search”, the unit will
automatically store current radio frequency into
current station.
External Audio Input Setting:
Press 【FUNCTION】 key or 【AUX】 key on
remote or panel to switch the unit into audio input
state;
At this time, the “AUX” or “Audio Input” channel
interface of the unit must be connected to AF
generator input of any machine.
Radio Program Selection:
Press【 】 and 【 】 keys on remote or【
/PREVIOUS 】 and【 /NEXT】keys on panel to
select stored radio program.
FM Operation:
FM Radio:
Press 【FUNCTION】 or 【FM】 key on panel or
remote to switch the unit to FM operation mode.
Manual Search:
Press 【Fast Backward】or【Fast Forward】 keys
on panel or remote to manually tune and search.
You c an sea rc h des i re d rad io b ac kw a rd s or
forwards.
Auto Search:
Press 【SEARCH】keys on the panel or press and
hold 【SEARCH】 key on remote control then the
unit will automatically search in full band. FM
frequ en cy r an ge :87-108 MH Z( 50 KH Z f or e ac h
step).
Please note: After you have found your specic
station, the unit wil l automatically store it into
current program. The FM search is affected by the
radio signal strength. If no program is found during
auto search or an offset frequency occurs, please
use manual search, frequency-selecting search or
adjust frequency by adjusting antenna position.
Frequency-Selecting Search:
Press 【GOTO】 key on , the unit will the remote
display frequency-selecting state and then use
number keys to input your desired radio frequency.
FM frequency range: 87-108 MHZ
E.g. Input 1060 for 106 MHZ; input 9140 for 91.4
MHZ. The frequency input must have 4 gures.
Troubleshooting
Before repairing, please take a look at the following problems and possible solutions rst.
Problem Reason Measure
No Power.
No Image.
No Sound.
Bad Image Quality.
DVD Player Not
Activated.
Mp3 No Sound
or with Noise.
No disc, USB, inserted.
Bad video connection or not
connected well.
Connected TV doesn't work.
Not set to current connecting
channel.
Bad audio connection or not
connected well.
Connected unit doesn't work
or volume is muted.
Disc is dirty.
Bad image quality of disc.
No disc inserted.
Disc installed upside down.
Disc installed incorrectly into it's slot.
Disc is dirty.
TV displays setting screen.
Remote is not aimed at the
receiving window.
The remote and DVD player are too
far away from each other.
There is a large obstacle between
the remote and the receiving window.
Remote has low batteries.
Unsupported le format.
No le in USB, format is incorrect.
USB damaged.
Locking level is activated.
Connect plug properly.
Insert disc, USB
Set TV to current output platform.
Replace TV connection or connect
correctly.
Ensure TV works properly.
Set to current connecting channel.
Replace audio connection or
connect correctly.
Ensure connected unit works
properly or turn volume up.
Clean disc.
Replace disc with good image quality.
Insert disc.
Place the silk-screen side upward.
Place disc into it's slot correctly.
Clean disc.
Quit setting state.
Unlock or change locking level.
Aim remote at the receiving window.
Please operate within effective
range of 7m.
Please move obstacle.
Please replace with new batteries.
Skip the le.
Repair or replace USB.
Remote
Malfunction.
USB, File(s)
Unavailable.
The unit doesn't work
after the power has
been switched on.
TV isn't set to DVD output.
Plug is not properly connected.
Please store supportable le formats
or format the USB, then re-copy
the les.
Fault Guide:
Source switching:
1.While the disc is playing, press [SOURCE] key on
remote control to switch to USB mode.
2. An interface will appear when switching from disc
to USB. Press direction keys to select the le then
press 【ENTER】key for conrmation.
3.System will automatically load the USB les when
there is no disc loaded.
Loading ...