Loading ...
Loading ...
Loading ...
in the Electronic Vehicle Information Center (EVIC).
Refer to “Electronic Vehicle Information Center (EVIC)”
in “Understanding Your Instrument Panel” for further
information. To turn ESC ON again, momentarily press
the “ESC Off” switch.
NOTE: The ⬙ESC OFF⬙ message will display and the
audible chime will sound when the shift lever is moved
into the PARK position from any position other than
PARK and then moved out of the PARK position. This
will occur when the message was previously cleared.
WARNING!
In the ESC “Full Off” mode, the engine torque reduc-
tion and stability features are disabled. Therefore, the
enhanced vehicle stability offered by ESC is unavail-
able. In an emergency evasive maneuver, the ESC
(Continued)
WARNING! (Continued)
system will not engage to assist in maintaining stabil-
ity. ⴖESC Offⴖ mode is intended for off-highway or
off-road use only.
NOTE: When the ESC is switched OFF, a feature of the
system remains active. This feature controls wheel spin
across an axle quite similarly to a limited slip differential.
If one wheel on an axle is spinning faster than the other,
the system will apply the brake of the spinning wheel
and allow more engine torque to be applied to the wheel
that is not spinning. To improve the vehicle’s traction
when driving with tire chains, or when starting off in
deep snow, sand, or gravel, it may be desirable to switch
to the “Partial Off” mode by momentarily pressing the
“ESC Off” switch.
334 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...