Loading ...
Loading ...
Loading ...
Legal Notice
Laser safety information
l Laser class: CL
ASS 1. Compliance with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice. 50, dated June 24, 2007
l Wavelength: 940 nm
l Laser standard (International): IEC/EN 60825-1:2014
l Laser standard (US): FDA 21 CFR Part 1040.10
Water and Dust Resistance
The device is splash, water, and dust resistant and was tested under controlled laboratory conditions
with a rating of IP68 under IEC 60529. Splash, water, and dust resistance are not permanent
conditions, and resistance might decrease as a result of normal wear. Do not charge your device in
humid conditions. For details about this feature, please visit http://consumer.huawei.com/en/support.
Conditions for IP68 resistance level:
l S
tatic fresh water at a depth of 1.5 m
l Test duration: 30 minutes
l Temperature difference between the water and the device: no greater than 5°C
To prevent liquid damage, avoid the following:
l Exposing your device to pr
essurized or high velocity water. For example, carrying the device with
you when taking a shower, swimming, water skiing, or surng.
l Using the device in hot and humid conditions, such as in a sauna, spa, and bathroom.
l Exposing the device to liquids other than pure water. For example, seawater, pond water, salt water,
ionized water, beverages containing alcohol or sugar, cosmetic lotions, or detergents.
l Intentionally submerging the device or placing it in environments that may cause damage.
l Connecting the device to accessories or charging it when it is wet.
l Dropping your device or other impacts that may cause damage. Disassembling your device or
performing other destructive operations.
l Using the device when the card tray or slot is not properly inserted.
What should I do if my device gets wet?
l Avoid drying your device using external sources of heat (such as a hair dryer or microwave oven).
Avoid placing objects such as cotton swabs or tissue paper into the charging port or speaker holes.
l Immediately dry all surfaces of your device, and then place it in a well-ventilated and dry area. Place
your device in front of a fan. Let the fan blow cold air against the charging port and speaker holes.
This may dry your device faster.
l If your device has been immersed in water, or the microphone, receiver, or speaker is wet, the
sound may not be clear during calls. Dry your device by referring to the preceding operations.
136
Loading ...
Loading ...
Loading ...