Loading ...
Loading ...
Loading ...
ENGLISH
11
NOTE : In COOL mode, the thermostat in the air
conditioner runs the compressor until the set
temperature is reached, then cycles the
compressor on and off to maintain the set
temperature.
In COOL mode, the
Ʒ/Ƹ
buttons adjust the set
temperature up to 86°F or down to 60°F, in one-degree
increments. When the TIMER function is selected, use
the
Ʒ/Ƹ
buttons to adjust the delay time from 0 to 24
hours, in one-hour increments.
Sets the air discharge louvers to open and shut,
circulating the air more effectively through the room.
If the louvers do not move properly, unplug and plug in
the power cord.
NOTE : Press and hold the Fan button on the control
panel for 3 seconds to set Swing.
LED display shows the set temperature, fan speed, or
the selected TIMER delay.
LEDs illuminate to indicate the active Mode, fan speed,
and other settings. An FL error code displays when the
water drain tank needs to be emptied.
Remotely change units between °C and °F
NOTE : To change units from the control panel, press
and hold the
Ʒ
and
Ƹ
buttons at the same
time.
°C/°F
Turn on/off the Display screen.
NOTE : Press and hold the Timer button on the control
panel for 3 seconds to set Light.
LIGHT
1 2 9 5
8
3
6
4
7
6
2
1
5
3
4
8
7
COV34636801 2017. 12. 11. 오전 10:09 페이지 11
Loading ...
Loading ...
Loading ...