Loading ...
Loading ...
Loading ...
47MAINTENANCE
ENGLISH
1
Remove the old water lter.
Lower or remove the top left shelf to allow the
water lter to rotate all the way down.
Pinch the sides to open the water lter cover.
NOTE
Replacing the water lter causes a small amount of
water (around 1 oz. or 25 cc) to drain.
Wrap a cloth around the front end of the water lter
cover to collect any leaking water. Hold the water
lter upright, once it is removed, to prevent any
remaining water from spilling out of the water lter.
2
Pull the water lter downward and turn it
counterclockwise before pulling it out. Make sure
to rotate the lter down completely before pulling
it out of the manifold hole.
3
Replace with a new water lter.
Take the new water lter out of its packing and
remove the protective cover from the o-rings.
With the water lter tabs in the horizontal position,
push the new water lter into the manifold hole
and turn it clockwise until it stops.
4
Close the water lter cover. The cover will click
when closed correctly.
5
After the water lter is replaced, dispense 2.5
gallons of water (ush for approximately 5
minutes) to remove trapped air and contaminants
from the system.
NOTE
Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.
6
After changing the lter, press and hold the
Water Filter button for three seconds to reset the
indicator light.
NOTE
To purchase a replacement water lter:
Visit your local dealer or distributor
Search using "water lter" on lg.com
Use replacement cartridge: ADQ747935**
For further assistance, call:
1-800-243-0000 (USA)
1-888-542-2623 (Canada)
Loading ...
Loading ...
Loading ...