Loading ...
Loading ...
Loading ...
6
ENGLISH
When transporting a large TV, there should be at least 2 people.
When transporting the TV by hand, hold the TV as shown in the
following illustration.
(Only OLED55/65E8*)
Hold the side of the TV with one hand, and hold the bottom of the
rear cover with the other. (Hold the rear cover when placing the TV
on the oor. Holding the bottom glass may result in injury.) (Only
OLED55/65E8*)
When transporting the TV, do not expose the TV to jolts or excessive
vibration.
When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
Do not apply excessive pressure to cause exing / bending of frame
chassis as it may damage screen.
When handling the TV, be careful not to damage the protruding
buttons.
Avoid touching the screen at all times, as this may result
in damage to the screen.
Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
When attaching the stand to the TV set, place the screen
facing down on a cushioned table or at surface to
protect the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10
c
m
10 cm
10 c
m
10
cm
10
c
m
(Depending on model)
2 Connect the power cord to a wall outlet.
If you install the TV on a stand instead of mounting it on a
wall, make sure that the removed brackets are reattached
at the bottom of the TV. (Only OLED55/65E8*)
Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
Do not use any unapproved items to ensure the safety
and product life span.
Any damage or injuries caused by using unapproved
items are not covered by the warranty.
Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
Loading ...
Loading ...
Loading ...