Overview
The BEAUTURAL Fabric Shaver is a rechargeable, electric lint remover designed to remove pilling, fuzz, and lint from various fabrics. It features a digital LED display, three speed settings, and a safety lock mechanism.
Features and Specifications
Key Features
- LED Display: Shows current battery level and selected speed setting.
- 3-Speed Settings: Adjustable speed for different fabric types and pilling severity.
- 6-Leaf Stainless Steel Blades: For efficient lint and pilling removal.
- Rechargeable Battery (Type-C): Cordless and portable design.
- Safety Lock: Device stops automatically if the lid is open or loose.
- Removable Lint Collection Box: For easy disposal of collected lint.
- Included Cleaning Brush: For cleaning the device.
Technical Specifications
- Brand: BEAUTURAL
- Model Number: 1-MR02NA15
- Materials: Metal, Plastic
- Handle Material: Plastic
- Operation Mode: Automatic
- Color Options: Light Gray, Black
Use Guide
Parts Identification
- Power Button: Turns the device on/off and cycles through speed settings.
- LED Display: Indicates battery level (1-3 bars) and speed setting (1, 2, or 3).
- Shaver Head/Mesh Foil: The metal honeycomb mesh that covers the rotating blades. Contains holes of various sizes to catch lint.
- Lint Collection Box: Compartment that collects removed lint and pilling.
- Type-C Charging Port: For recharging the internal battery.
- Safety Lock Latch: Secures the shaver head. The device will not operate if this is not properly closed.
Initial Setup and Charging
- Before first use, fully charge the device using the provided Type-C cable.
- Connect the cable to the Type-C port on the shaver and a standard USB power adapter (not included).
- The LED display will indicate the charging progress. A full charge is recommended.
Operating Instructions
- Prepare the Fabric: Lay the garment or item flat on a stable surface.
- Power On: Press the power button. The LED display will light up, showing the battery level and default speed (likely Speed 1).
- Select Speed: Press the power button repeatedly to cycle through the three speed settings (1, 2, 3). Use lower speeds for delicate fabrics and higher speeds for tougher pilling or thicker materials.
- Begin Shaving: Place the shaver head flat against the fabric. Gently move the device in straight, slow, overlapping strokes. Do not press down hard; let the blades do the work.
- For Stubborn Pilling: If lint is deeply embedded, make multiple passes over the same area or switch to a higher speed setting.
- Power Off: Press and hold the power button to turn the device off after use.
Cleaning and Maintenance
- Empty the Lint Box: Regularly open the lint collection box and empty the contents into a trash bin.
- Clean the Blades and Mesh: Use the included small brush to sweep away any lint residue from the blades and the inside of the mesh head.
- General Wiping: Wipe the exterior of the device with a dry or slightly damp cloth. Do not submerge the shaver in water.
Troubleshooting
- Device does not power on:
- Ensure the shaver head is properly tightened and closed. The safety lock prevents operation if the head is loose.
- Check the battery level. Recharge the device if necessary.
- Poor lint removal performance:
- The lint collection box may be full. Empty it.
- The blades or mesh may be clogged. Clean them with the provided brush.
- Switch to a higher speed setting for more effective cleaning.
- For fine, embedded fuzz, multiple passes may be required.
- Device stops during use:
- The safety lock may have been triggered. Check that the shaver head is securely closed.
Safety Information
- Always turn the device off before cleaning or when not in use.
- Keep the shaver head away from fingers, hair, and loose cords during operation.
- The safety lock is designed to prevent accidental activation. Do not attempt to disable it.
- This device is intended for fabric care only. Do not use it on human or animal skin.
- Keep the device away from water and other liquids.
- Store in a cool, dry place out of reach of children.