Povasee A6 5000A Jump Starter with Air Compressor

Overview

The Povasee A6 is a portable, multifunctional automotive power device that combines six core functions in a single unit:

• Vehicle jump-starting (12V vehicles)
• Tire inflation (up to 150 PSI)
• LED lighting
• SOS signaling
• Fast charging for mobile devices
• Powering 12V car accessories

Key Specifications

What's in the Box

• 1 × Jump Starter with Air Compressor
• 1 × Jumper Cable (red and black clamps)
• 1 × USB-C Cable
• 1 × Pump Hose
• 4 × Air Nozzles
• 1 × User Manual
• 1 × Storage Case

Features

1. Jump Starter Function

• Peak Current: 5000A — capable of instantly starting 12V vehicles with up to 9L gas or 8L diesel engines.
• Jump-Start Capacity: Up to 60 jump-starts on a single full charge.
• Battery Life: Over 1500+ recharge cycles.
• Standby Time: Approximately 24 months when fully charged.
• RST Button: If the vehicle battery voltage is too low (below 9V), press the "RST" button to assist the engine in restarting.

2. Air Compressor / Tire Inflator

• Max Pressure: 150 PSI.
• Inflation Speed: Inflates a car tire to 20 PSI in approximately 2 minutes.
• Airflow: 35 L/Min via turbocharged technology.
• Continuous Operation: Up to 25 minutes.
• Preset Modes: 4 preset inflation modes for cars, motorcycles, bicycle tires, and balls.
• Auto-Stop Function: Automatically stops inflation at the preset pressure to prevent over-inflation.
• Nozzles: 4 different nozzles included for various inflation needs.
• LCD Screen: Displays current pressure and battery level.

3. LCD Display

The built-in LCD screen provides real-time information including:

• Battery power level
• Tire pressure readings (PSI)
• Inflation mode selection
• Charging status

4. LED Lighting and SOS Signaling

• LED Light: 800-lumen output for illumination in dark conditions.
• SOS Mode: Flashing signal for emergency situations.

5. Fast Charging for Mobile Devices

The device can be used as a power bank to charge mobile phones and other USB-powered devices via the USB-C port.

6. Powering 12V Car Accessories

The jump starter can power 12V car accessories when used as a portable power source.

7. Safety Protection System

The A6 includes 10 intelligent protection systems:

1. Reverse polarity protection
2. Reverse charge protection
3. Over-discharge protection
4. Reverse connection protection
5. Short circuit protection
6. Over-charge protection
7. Over-current protection
8. Over-heat protection
9. Spark resistance
10. Stable operation across extreme temperatures (-22°F to 140°F)

8. Thermal Architecture

The A6 features a honeycomb-inspired heat dissipation configuration designed to improve heat dissipation, increase safety rating, and extend operational lifespan.

Use Guide

Charging the Device

1. Connect the included USB-C cable to the charging port on the jump starter.
2. Plug the other end into a USB power source (wall adapter or car charger).
3. Charge until the LCD display indicates a full charge.

Jump-Starting a Vehicle

1. Ensure the jump starter has sufficient charge (greater than 75% recommended).
2. Connect the jumper cable to the jump starter's jump-start port.
3. Connect the red clamp to the positive (+) terminal of the vehicle battery.
4. Connect the black clamp to the negative (-) terminal of the vehicle battery or to a grounded metal part of the vehicle frame.
5. Start the vehicle. If the engine does not start immediately, wait a few seconds and try again.
6. Once the vehicle starts, disconnect the black clamp first, then the red clamp.
7. Disconnect the jumper cable from the jump starter.

Using the RST (Reset) Button

If the vehicle battery voltage is too low (below 9V) and the jump starter does not detect the battery, press the "RST" button to force-start the engine.

Inflating Tires

1. Connect the pump hose to the air compressor outlet on the device.
2. Attach the appropriate nozzle or connector to the tire valve stem.
3. Select the desired inflation mode using the LCD screen controls (car, motorcycle, bicycle, or ball).
4. Set the target pressure using the preset modes or manually adjust as needed.
5. Press the start button to begin inflation.
6. The device will automatically stop when the preset pressure is reached.
7. Disconnect the hose from the tire valve and the device.

Using the LED Light and SOS Mode

1. Press the light button to turn on the LED light.
2. Press again to cycle through modes (steady, SOS flashing).
3. Press again to turn off the light.

Charging Mobile Devices

1. Connect a USB cable to the USB output port on the jump starter.
2. Connect the other end to your mobile device.
3. Charging will begin automatically.

Maintenance and Storage

• Recharge the jump starter every 2–3 months to activate the battery and prolong its lifespan.
• Store the device in the included storage case when not in use.
• Keep the device in a cool, dry place.
• Do not expose the device to extreme temperatures beyond the operating range (-22°F to 140°F).

Important Safety Notes

• Do not use the air pump function continuously. Allow cooling periods between uses.
• Fully charge the device before first use.
• It is suggested to start the car when power is greater than 75%.
• Recharge the jump pack every 2–3 months to activate the battery and prolong lifespan.
• Do not allow jumper clamps to touch each other.
• Ensure correct polarity when connecting to a vehicle battery.

Troubleshooting

Specifications

Warranty and Support

The Povasee A6 Jump Starter with Air Compressor includes a 24-month warranty from the date of purchase.

For after-sales questions or support, please contact the manufacturer through the original point of purchase.

Related Products