ENEACRO ENRH3203 1-1/4 Inch SDS-Plus 12.5 Amp Heavy Duty Rotary Hammer Drill

Overview

The ENEACRO ENRH3203 is a heavy-duty, corded electric rotary hammer drill designed for demanding concrete drilling, chiseling, and light demolition tasks. It features a 12.5 Amp motor, three operating modes, and an SDS-Plus chuck system for efficient performance.

The tool is supplied as a complete kit, including drill bits, chisels, an auxiliary handle, maintenance items, and a carrying case.

Features and Specifications

Key Features

• High-Performance Motor: 12.5 Amp industrial motor delivering 7 Joules (5.2 ft-lbs) of impact force. Features heat-resistant copper wiring and a sealed anti-dust design.
• Three-Function Operation: Select between Drill Only, Hammer Only, and Rotary Hammer modes for versatile applications in wood, steel, concrete, and masonry.
• Anti-Vibration & Safety Design: Dual-layer anti-vibration system, a 360° adjustable auxiliary handle, and a PU soft-grip main handle. Includes a safety clutch that disengages during bit jams to prevent wrist injury.
• SDS-Plus Keyless Chuck: Allows for quick, tool-free bit changes. Maximum drilling capacity of 1-1/4 inch in concrete and 1/2 inch in metal.
• Complete Kit: Includes the hammer drill, three SDS-Plus drill bits (8mm, 10mm, 12mm), two 10-inch chisels (point and flat), auxiliary handle, replacement carbon brushes, lubricant grease, a dust cap, and a carrying case.

Technical Specifications

Safety Information

• This tool is designed for 120V AC power outlets. Do not use with a voltage converter unless explicitly rated for this purpose.
• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
• Ensure the work area is clean, well-lit, and free of obstructions. Keep bystanders at a safe distance.
• Before connecting to power, ensure the function switch is in the "OFF" position and the trigger is not depressed.
• Do not force the tool. Use the correct accessory for the material and allow the tool to do the work.
• Disconnect the power cord from the outlet when changing accessories, making adjustments, or when the tool is not in use.
• Regularly inspect the power cord for damage. Do not use the tool if the cord is damaged.
• The safety clutch is designed to disengage in case of a bit jam. If this occurs, release the trigger, disconnect power, and clear the jam before proceeding.

Parts Identification and Controls

1. Main Handle with Trigger: The primary grip and control. The variable-speed trigger is located here.
2. Function Mode Selector: A rotary switch or dial to select between the three modes: Drill Only (drill icon), Hammer Only (hammer icon), and Rotary Hammer (hammer and drill icon).
3. SDS-Plus Chuck: Located at the front of the tool. Accepts SDS-Plus shank drill bits and chisels.
4. 360° Adjustable Auxiliary Handle: Side handle that can be rotated and locked into various positions for better control and leverage.
5. Motor Housing: Contains the 12.5 Amp motor. Features ventilation slots.
6. Power Cord: 6.6 ft cord with a plug for 120V outlets.

Use Guide

Initial Setup and Inspection

1. Unpack all components from the carrying case and inspect for any shipping damage.
2. Ensure you have all listed items: hammer drill, drill bits, chisels, auxiliary handle, carbon brushes, grease, dust cap.
3. Firmly attach the auxiliary handle to the threaded socket on the front of the tool. Rotate it to a comfortable position and tighten the locking collar.

Installing and Removing SDS-Plus Accessories

1. Pull the chuck sleeve back towards the tool body.
2. Insert the SDS-Plus shank of the drill bit or chisel into the chuck until it clicks into place.
3. Release the chuck sleeve. Give the accessory a slight pull to ensure it is locked securely.
4. To remove, pull the chuck sleeve back and pull the accessory out.

Note: No additional tools are required for bit changes with the SDS-Plus system.

Selecting the Operating Mode

Rotate the function selector to the desired symbol before connecting power or pulling the trigger.

• Drill Only (Drill Icon): Use for standard rotary drilling in wood, metal, or plastic. The hammering mechanism is disengaged.
• Hammer Only (Hammer Icon): Use for light chiseling, demolition, or tile removal. The tool delivers a hammering action without rotation.
Rotary Hammer (Hammer & Drill Icon): Use for drilling into concrete, brick, stone, or masonry. The tool combines rotation with a hammering action.

Operating the Tool

1. Plug the tool into a grounded 120V outlet.
2. Firmly grip the main handle and the auxiliary handle.
3. Position the bit or chisel on the work surface.
4. Depress the trigger to start the tool. Apply steady, forward pressure. Let the tool's weight and impact energy do the work; do not exert excessive force.
5. For drilling, periodically pull the bit out to clear dust from the hole.
6. Release the trigger to stop. Always wait for all motion to cease before setting the tool down.

Applications

• Drilling anchor holes in concrete, brick, or masonry.
• Light chiseling for tile removal, breaking small sections of concrete, or chasing walls.
• Drilling into wood or metal (using Drill Only mode and appropriate bits).

Maintenance

Regular Cleaning

Disconnect from power before any maintenance. Use a dry or slightly damp cloth to wipe down the tool exterior. Use a brush or compressed air to remove dust from the chuck area and ventilation slots. Do not use solvents or immerse the tool in liquid.

Lubrication

The included 329 grease is for lubricating the SDS-Plus chuck mechanism.

1. Pull back the chuck sleeve and apply a thin layer of grease to the visible steel balls and the shank of a clean bit.
2. Insert and remove the bit a few times to distribute the grease.
3. Wipe away any excess. Re-grease periodically, especially if the tool is used in dusty conditions or if hammering action becomes sluggish.

Carbon Brush Replacement

The tool includes a set of replacement carbon brushes. When the tool loses power, runs unevenly, or produces excessive sparking, the brushes may be worn.

1. Locate the brush caps on either side of the motor housing.
2. Unscrew or unclip the caps.
3. Remove the old brushes and insert the new ones.
4. Replace the caps securely.

Storage

Store the tool and all accessories in the provided carrying case in a clean, dry location. Keep the dust cap installed on the chuck when not in use.

Troubleshooting

Warranty and Support

The ENEACRO ENRH3203 Rotary Hammer Drill is backed by a 24-month limited warranty against defects in materials and workmanship from the date of purchase.

For warranty service, technical support, or to purchase replacement parts, contact the seller from whom you purchased the product or the ENEACRO storefront on Amazon.

Manufacturer: ENEACRO
Model/Part Number: ENRH3203
UPC: 778739921070