Overview
The Mengshen MS-TH02 is a digital indoor thermometer and hygrometer that displays real-time temperature, humidity, time, and date. It features a large LCD screen, a fast reading system, and the ability to store maximum and minimum readings. The device is powered by a single AAA battery (included) and can be placed on a table or mounted on a wall.
Features
Display and Readings
- Large LCD Screen: Displays temperature, humidity, time, and date simultaneously for easy reading.
- Temperature Range: -58°F to 158°F (-50°C to 70°C) with a resolution of 0.1°C (0.2°F). Accuracy: ±1°C (1.8°F).
- Humidity Range: 10% to 99% RH with a resolution of 1% RH. Accuracy: ±5% RH (30% to 70% RH).
- °C/°F Switch: Allows you to toggle between Celsius and Fahrenheit temperature units.
Clock and Calendar
- Displays the current time (clock function).
- Shows the calendar date (month and day).
Max/Min Memory
- Records and displays the maximum (MAX) and minimum (MIN) temperature and humidity readings since the last reset.
- Useful for monitoring environmental changes over a period.
Fast Reading System
- The sensor updates readings quickly, with a response time of 0.5 seconds, providing near real-time data.
Mounting Options
- Tabletop Stand: A retractable stand on the back allows the device to sit upright on a flat surface.
- Wall Mount: A hanging hole on the back enables easy wall mounting.
What's in the Box
- 1 x Mengshen MS-TH02 Temperature Humidity Meter
- 1 x AAA Battery (pre-installed)
- 1 x English User Manual
Use Guide
Powering the Device
- Locate the battery compartment on the back of the device.
- Remove the battery cover.
- Insert one AAA battery (1.5V) with the correct polarity (+/-). The device is powered on automatically.
- Replace the battery cover.
Setting the Time and Date
- Press and hold the MODE button (located on the front or side) for 3 seconds to enter time/date setting mode.
- The hour digits will flash. Press the ADJ button to adjust the hour.
- Press MODE again to confirm and move to the minutes. Repeat the adjustment process.
- Continue pressing MODE to cycle through and set the month and date.
- Press MODE one final time to save all settings and exit.
Switching Between °C and °F
- Locate the °C/°F button on the device.
- Press the button to toggle the temperature display between Celsius and Fahrenheit.
Viewing Max/Min Readings
- Press the MAX/MIN button once to view the maximum recorded temperature and humidity.
- Press the MAX/MIN button again to view the minimum recorded values.
- Press the button a third time to return to the current real-time readings.
- To clear the stored max/min values, press and hold the MAX/MIN button for 3 seconds.
Placement and Mounting
- Tabletop: Pull out the retractable stand on the back and place the device on a flat, stable surface.
- Wall Mount: Use the hanging hole on the back to hang the device on a screw or nail. Ensure the mounting surface is secure.
Note: Place the device away from direct sunlight, heat sources, and drafts for accurate readings. Avoid areas with high moisture (e.g., directly in a shower) to prevent damage.
Specifications
| Feature | Specification |
|---|---|
| Model | MS-TH02 |
| Display Type | Digital LCD |
| Temperature Range | -58°F to 158°F (-50°C to 70°C) |
| Temperature Accuracy | ±1°C (1.8°F) |
| Temperature Resolution | 0.1°C (0.2°F) |
| Humidity Range | 10% to 99% RH |
| Humidity Accuracy | ±5% RH (30% to 70% RH) |
| Humidity Resolution | 1% RH |
| Response Time | 0.5 seconds |
| Power Source | 1 x AAA battery (1.5V, included) |
| Outer Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 98 x 105 x 23 mm (3.82 x 4.13 x 0.91 inches) |
| Item Weight | 0.1 kg (3.5 oz) |
| Indoor/Outdoor Use | Indoor only |
Care and Maintenance
- Clean the device with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
- Remove the battery if the device will not be used for an extended period.
- Store in a cool, dry place within the storage temperature range of -20°C to 60°C (-4°F to 140°F) and humidity below 80% RH.