User Manual - Page 20

For ACCORD SEDAN 2006.

Loading ...
Loading ...
Loading ...
The lap/shoulder belt goes over
your shoulder, across your chest,
and across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page for how to
properly position the belt).
To unlock the belt, press the red
PRESSbuttononthebuckle.Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the seat belt, pull it out only
as far as needed.
The seat belts in all positions except
the drivers have an additional
locking mechanism that must be
activated to secure a child seat (see
page )
14
43
Additional Information About Your Seat Belts
Lap/Shoulder Belt
18
05/07/27 15:29:40 31SDP630 0021 
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...