GE - General Electric HTS22GCMARCC User Manual

Loading ...

Installation Instructions

TRANSFER BOTTOM HINGE

BRACKET TO THE LEFT

Remove the base grille by pulling it straight out.

Using a Torx Driver, move the bottom hinge bracket

from the right side to the left side.

NOTE: If the washer is not on the hinge bracket, check

to see if it is stuck to the bottom of the door.

TRANSFER CENTER HINGE

BRACKET TO THE LEFT

Remove the center hinge bracket by removing the

three Torx screws

NOTE: Keep these screws with the hinge bracket.

They are long screws and will be used when installing

the hinge on the other side.

You will need to remove the color-matched cap from

the screw head before you can remove the screw.

Use the edge of a thin flat blade to gently pry the

caps off the screw heads. (A putty knife works well

for this.) Cover the blade with tape to prevent

scratching the paint.

Remove the mullion cover from the left side using

the thin flat blade. Assemble it to the right side.

Remove the Torx screw from the center left side

of the cabinet. Screw it into the holes on the

right side.

Place the center hinge bracket over the holes at

the center left side of the cabinet. Insert and

tighten the three long screws.

Replace the cap by snapping it over the screw with

your finger.

TRANSFER DOOR STOPS

On each door, move the metal door stop from the

right to the left.

Move any screws from the left to the right.

Screw Cap

Mullion Cover

Loading ...

GE - General Electric Hotpoint Top-Freezer Refrigerator HTS22GCMARCC