Loading ...
Loading ...
Loading ...
51
OPERATION
Starting the Engine
1. Position the vehicle on a level surface outdoors or in a well-venti-
lated area.
2. Place the transmission in PARK.
3. Lock the parking brake.
Tip: The starter interlock will prevent the engine from starting if the transmission
is in gear and the brake is not engaged.
4. Sit on the vehicle and move the engine stop switch to RUN.
Tip: Do not press the throttle while starting the engine.
5. Turn the ignition key past the POSITION
LIGHTS ON position to engage the starter.
Activate the starter for a maximum of five
seconds, releasing the key when the engine
starts.
6. If the engine does not start, return the key to
the OFF position and wait five seconds before
attempting to start again. Activate the starter
for another five seconds if necessary. Repeat
this procedure until the engine starts.
NOTICE: Operating the vehicle immediately after starting could cause engine
damage. Allow the engine to warm up for several minutes before
operating the vehicle.
Cold Weather Operation
If the vehicle is used year-round, check the oil level frequently. A rising
oil level could indicate the accumulation of contaminates such as water
or excess fuel in the bottom of the crankcase. Water in the bottom of the
crankcase can lead to engine damage and must be drained. Water accu-
mulation increases as outside temperature decreases.
If a belt fails, always clean away all debris when replacing the belt.
Loading ...
Loading ...
Loading ...