Loading ...
Loading ...
Loading ...
TO EMPTY THE WATER BUCKET
Pull bucket out Lift by the handle Remove the cover Pour the water away
Return the cover and
the handle
NOTE:
Return the bucket
Clean the water bucket with clean water if needed. Do not use solvents, abrasive
materials or hot water.
Do not remove or damage the float in the bucket, or the unit cannot work correctly.
The bucket cover must be correctly fitted into position.
The "FULL" LE
D lights up if the bucket is not correctly fitted into position.
TO DRAIN WATER
You may use 2 methods to remove the collected water: water
bucket or drain hose.
A drain hose with an inner diameter of 12mm is quite suitable for
continuous drainage (1.2M drain hose is included):
1. Use a screwdriver to remove the ‘knockout’ at the back of
the unit. Attach the tubing to the connector through the hole.
2. The drain hose should lead downwards away from the unit,
with no sharp b
ends to ensure uninterrupted drainage.
8
1. When the water bucket is full, the "FULL" LED lights up and the unit stops within
a few minutes.
2. Do not move the unit or remove the water bucket if the machine is still operating.
Water may leak and cause damage to the unit or cause an electric shock.
3. To remove the water bucket, pull it out by gripping the bottom of the bucket, and
lift carefully.
4. Remove the cover of water bucket first, then pour the water away. Clean the
bucket and return the cover and the bucket to the correct position.
Loading ...
Loading ...
Loading ...