Loading ...
Loading ...
Loading ...
49-80823 Rev. 3 19
Oven Racks
(Cont.)
Probe
Care and Cleaning
Wall Oven
4. Shake the graphite lubricant before opening
it. Starting with left slide mechanism of the
rack, place four (4) small drops of lubricant
on the two (2) bottom tracks of the slide
close to the bearing carriers.
5. Repeat for the right slide mechanism of the
rack.
6. Open and close the rack several times to
distribute the lubricant.
7. Replace the cap on the lubricant and shake
it again. Turn the rack over and repeat
steps 3, 4, 5 and 6.
8. Close the rack, turn rack right-side-up and
place in the oven. See the Extension Oven
Racks section.
9. Repeat above steps for each rack.
NOTE: Do not spray with cooking spray or
other lubricant sprays.
The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled
scouring pad, rinse and dry.
To order additional temperature probes, see
the Accessories and Consumer Support
sections at the end of this manual.
Ŷ Do not immerse the temperature probe in
water.
Ŷ Do not store the temperature probe in the
oven.
Ŷ Do not leave the temperature probe inside
the oven during a self or steam clean cycle.
Loading ...
Loading ...
Loading ...