Loading ...
Loading ...
Loading ...
21En
English
DIN Rear-mount
1 Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
2 Tighten the screws on each side.
Screw
Mounting bracket
Dashboard or console
• Use eit
her truss (5 mm × 8 mm) or
flush surface (5 mm × 9 mm) screws,
d
epending on the bracket screw
holes.
(Only for FH-X820BS/X720BT/X721BT)
The microphone should be placed directly
in
front of the driver at a suitable distance
to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift lever.
Be sure to install the microphone in such a
way that it will not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
To install on the sun visor
1 Fit the microphone lead into the
groove.
2 Install the microphone clip on the sun
visor.
Lowering the sun visor reduces the
vo
ice recognition rate.
To install on the steering
column
1 Slide the microphone base to detach it
from the microphone clip.
Microphone
Microphone clip
Microphone base
Installing the microphone
Microphone lead
Groove
Microphone clip
2 Install the microphone on the rear side
of the steering column.
Double-sided tape
Loading ...
Loading ...
Loading ...