Operating and Installation
Instructions
Freezer
To prevent accidents and appliance damage read these instructions
before installation or use.
M.-Nr. 10 605 900
en - US, CA
IMPORTANT SAFETY INSTRUCTIONS.................................4
Guide to the freezer ................................................8
Control panel for freezer .............................................9
Control panel for Ice/Water Dispenser ..................................9
Before use ......................................................10
Turning the appliance On/Off ........................................10
Settings.........................................................11
Using the settings .................................................11
Additional settings .................................................11
Turning the button sound On/Off ......................................12
Turning off for longer periods of time ..................................13
Temperature and door alarm .......................................14
Temperature alarm ................................................14
Door alarm .......................................................14
Setting the temperature............................................15
Using the freezer efficiently ........................................17
Freezing food.....................................................17
Defrosting .......................................................18
Cooling drinks quickly ..............................................18
SuperCool.......................................................20
Ice/Water Dispenser...............................................21
Safety lock .......................................................24
Lighting .........................................................24
Settings .........................................................25
Anti-condensation heater............................................25
Anti-clumping.....................................................26
Button sound .....................................................26
Automatic defrost ................................................27
Adjusting the interior fittings .......................................28
Cleaning and care ................................................30
Cleaning the interior and accessories ..................................32
Appliance doors ..................................................32
Ice cube container.................................................33
Drip tray .........................................................33
Ventilation slits ....................................................33
Door seals .......................................................33
Contents
Water filter ......................................................36
Water filter change indicator .........................................36
Exchanging the water filter ..........................................37
Confirming the filter change .........................................38
Using an external water filter .........................................38
Lead free certificate ...............................................41
Frequently asked questions ........................................42
Noises ..........................................................48
After sales service ................................................49
Warranty ......................................................49
Caring for the environment.........................................52
Installation ......................................................53
Climate Range ....................................................53
Installation site ....................................................53
Stainless steel panels ..............................................56
Installation options .................................................56
Door dimensions (open 115°) ........................................59
Niche dimensions .................................................60
Installing the appliance ............................................62
Before you begin ..................................................62
Preparing the installation niche .......................................65
Sliding the appliance into the installation niche ..........................69
Aligning the appliance..............................................70
Attaching the appliance to the installation niche..........................71
Aligning the Ice/Water Dispenser .....................................73
Attaching the frame and the shelf .....................................75
Plumbing........................................................76
Electrical connection..............................................79
Contact details ..................................................83
Contents
3
When using the appliance, follow
basic safety precautions, including
the following:
Read all instructions before
installation and use to prevent
accidents and machine damage.
This appliance conforms to current
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
They contain important notes on
installation, safety, use and
maintenance. Miele cannot be held
liable for non-compliance with these
instructions.
Keep these instructions in a safe
place and pass them on to any
future owner.
~
Only connect power to the
appliance when all installation and
plumbing work is complete.
IMPORTANT SAFETY INSTRUCTIONS
4
Electrical
Safety
~ Before installation, make sure that
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
~ Before installation or service,
disconnect the power supply to the work
area by unplugging the unit,
"tripping" the circuit breaker or removing
the fuse.
~ Do not connect the appliance
to the electrical supply with a power bar
or extension cord. These are a fire
hazard and do not guarantee the
required safety of the appliance.
~ Be certain your appliance is properly
installed and grounded by a qualified
technician. To guarantee the electrical
safety of this appliance continuity must
exist between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of the
house checked by a qualified
electrician.
Installation
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the door closed until the
appliance is completely installed
and secured per installation
instructions.
~
Before installing the appliance,
check for externally visible damage.
Do not operate a damaged appliance.
~
This appliance must be installed
and connected in compliance with the
installation instructions.
~
The appliance must be properly
installed before operation to ensure that
no electrical components are
accessible.
~
Installation work and repairs should
only be performed by a trained
technician in accordance with national
and local safety regulations. Repairs
and other work by unqualified persons
could be dangerous.
~
Installation must comply with local
plumbing regulations and state laws.
~
Connection to the water supply and
any repairs to the ice maker must only
be carried out by a suitably qualified
person.
~
Before making plumbing
connections, ensure the appliance is
disconnected from the mains electricity
supply.
~
Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser
-
vice Department.
~
This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~
Do not install the freezer in a room
with too low an ambient temperature,
e.g., a garage, as this may lead to the
appliance switching off for longer
periods so that it cannot maintain the
required temperature.
~
In appliances with an automatic ice
maker, avoid contact with the moving
parts of the ejector mechanism, or with
the heating element located on the
bottom of the ice maker. Do not place
fingers or hands on the automatic ice
making mechanism while the freezer is
plugged in.
~
The ice cube maker is not suitable
for connection to a hot water supply.
~
Do not use water that is
microbiologically or chemically unsafe
or of unknown quality without adequate
disinfection or other treatment before or
after the filter is used; the filter alone is
not an adequate safeguard.
IMPORTANT SAFETY INSTRUCTIONS
5
Use
~
This appliance is not designed for
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
– shops, offices and similar work
environments
– by customers in hotels, motels, Bed
& Breakfasts or similar residential
environments.
~
This appliance is not intended for
outdoor use.
~
The appliance is only intended for
residential use to store frozen foods,
freeze fresh foods and prepare ice.
All other uses are prohibited and may
be dangerous.
~
Persons who lack physical, sensory
or mental abilities, or experience with
the machine should not use it without
supervision or instruction by a
responsible person.
~
To reduce the risk of injury, do not
allow children to play in, on or near the
appliance, especially in the door hinge
area.
~
After your freezer is in operation, do
not touch the cold surfaces in the
freezer compartment, particularly when
hands are damp or wet. Skin may
adhere to these extremely cold
surfaces.
~
Avoid contact with the moving parts
of the ejector mechanism, or with the
heating element located on the bottom
of the ice maker. Do not place fingers
or hands on the automatic ice making
mechanism while the appliance is
plugged in.
~
Do not refreeze frozen foods which
have thawed completely.
~
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
~
To avoid serious illness or death, do
not deactivate the water filter display.
~
Do not use sharp-edged objects to
remove frost and ice, or separate
frozen foods and remove ice trays.
They will damage the evaporator,
causing irreversible damage to the
appliance.
~
Do not use defrosting sprays or
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
~
Do not use any oils or grease on the
door seal, as these will cause the seal
to deteriorate and become porous with
time.
IMPORTANT SAFETY INSTRUCTIONS
6
~
Do not block the ventilation gaps in
the plinth or the top of the appliance
housing unit, as this can impair the
efficiency of the appliance, increase the
electricity consumption and cause
damage to the appliance.
~
Never use a steam cleaner to clean
the appliance. Pressurized steam could
damage electrical components and
cause a short circuit.
~
Before using the Ice/Water
dispenser it is important to flush the
lines and clean the part thoroughly.
The following applies to
stainless steel appliances:
~
Do not use sticky notes, transparent
adhesive tape, masking tape or other
types of adhesive on the coated
surface of the appliance door. These
will damage the surface, causing it to
lose its soil resistant protective coating.
~
The high-quality surface coating of
the appliance door is susceptible to
scratches. Even a magnet can cause
damage.
Disposal of your old appliance
~
Before disposing of an old
appliance, first make the door latch or
lock unusable.
~
Take off the door.
~
Leave the shelves in place so that
children may not easily climb inside.
~
Consult with your municipal policy
on recycling.
~
Be careful not to damage any part of
the pipework while awaiting disposal
by:
- puncturing the refrigerant
channels in the evaporator.
- bending any pipework.
- scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
~
Your old freezer may have a cooling
system that used CFCs
(chlorofluorocarbons). CFCs are believed
to harm stratospheric ozone.
If you intentionally release this CFC
refrigerant, you can be subject to fines
and imprisonment under provisions of
environmental legislation. Make sure the
CFC refrigerant is removed and disposed
of by a qualified technician.
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
7
California Proposition 65
– This product can expose you to
chemicals including vinyl chloride
,
which is known to the State of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
a Interior lighting
b Door shelf
c Ice cube maker
d Ice cube container
e Interior shelf
f Control panel for the Freezer
g Main switch to turn the appliance
On/Off
h Freezer baskets
i Water filter
j Ice / Water dispenser in the door
k Control panel for Ice / Water
Dispenser
l Ice / Water dispenser outlet
m Drip tray with grid and cover
Guide to the freezer
8
Control panel for freezer
a Access button "p"
activates the control panel
b Temperature display
X colder; Y warmer
Allows you to set the desired
temperature in the freezer
c On/Off sensor button for the
SuperCool function
Control panel for Ice/Water
Dispenser
a Lighting sensor button
b Water sensor button
c Ice cube sensor button
d On/Off sensor button for the
Ice/Water dispenser
e Sensor button for the temperature
and/or door alarm*
f Water filter change indicator*
* Only visible when the relevant
function is activated
d Crushed ice sensor button
e Safety lock sensor button
Guide to the freezer
9
Before using for the first time
The stainless steel surface of the
appliance is protected with a plastic
film, which protects it during shipping.
Do not remove this protective film until
the appliance has been completely
installed.
^ Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap.
Dry with a soft cloth.
If the appliance was transported or
laid horizontally for any reason,
allow it to stand vertical for at least 8
hours before turning it on. Failure to
do so will affect the functioning of
the appliance.
Turning the appliance On/Off
^ Open the appliance door.
^ Turn the appliance On/Off with the
main switch.
The main switch is located on the
right-side underneath the control panel.
Once on, the appliance begins cooling.
When the door is open, the interior
lights come on.
The access button will light in the
control panel.
The preset temperatures (factory
default settings) are reached after a few
hours. Do not put any food in the
appliance until the preset temperatures
are reached.
,
Turning off the appliance with
the main switch does not safely
isolate it from the power supply.
Before use
10
Using the settings
This appliance is operated with the use
of touch keys activated by a finger.
– An available button will appear white.
– A selected button will appear yellow.
^ Touch the access button "p"soit
turns yellow.
On the control panel you will see
additional sensor buttons to operate the
appliance.
These buttons allow you to:
– adjust the temperature,
– select the SuperCool function, or
– turn the Ice/Water Dispenser On/Off.
For additional information, see the
corresponding sections in this manual.
^ To leave the settings menu, touch the
access button "p" so it turns white.
The last settings entered are stored.
If the access button is not pressed
the display will go out after approx.
30 secs.
The other sensor buttons now
disappear from the control panel.
Additional settings
In the settings mode you can select
and change functions.
In settings mode, certain settings can
be changed. The function possibilities
are described in the respective
chapters of this manual.
Overview of the selectable function
settings:
Function Display text
To enter and exit the
Settings mode
c
Temperature unit
°C-°F
(see "Setting the
temperature")
†
Button sound on/off
(see "Settings")
=
no function ^
Settings
11
Turning the button sound
On/Off
If you prefer the buttons to be silent
when touched the button sound can be
turned off.
^ Touch the access button "p"soit
turns yellow.
^ Note the position of the X button, but
do not touch.
^ Touch the access button "p" again so
it turns white.
Only the access button "p" is visible.
^ Place one finger on the position of
the X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button "p" once.
Keep holding the X button down until
the following appears in the display
(approx. 5 seconds).
^ Tap the X button until = appears in
the display.
^ Touch the access button "p"to
confirm.
^ By touching the X button, you can
choose between:
= 0 : Button sound is off
= 1 : Button sound is on
= – : Return to menu.
^ Touch the access button "p"to
confirm the setting.
^ Tap the X button until you see ; in
the display.
^ Touch the access button "p".
You have now left the Custom settings
mode.
Note: the button sound of the
Ice/Water dispenser must be turned
off separately.
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
Settings
12
Turning off for longer periods
of time
If the appliance is not going to be used
for an extended time (for example,
during a vacation) some precautions
need to be taken:
^ Shut off the water supply line,
(several hours before switching off
the appliance)
^ Take all food out of the appliance
^ Turn the appliance off
^ Unplug the appliance
^ Empty the ice cube container
^ Clean the interior
^ Remove and discard the water filter
(secure the filter cap)
^ Leave the door open to prevent
odors
Settings
13
The appliance is equipped with an
alarm system, to ensure that the
temperature does not rise unnoticed
because of energy loss or an open
door.
The alarm system is always
operational, it does not need to be
switched on.
Temperature alarm
If the temperature becomes too warm,
an alarm sounds and the "alarm"
indicator turns red and flashes and the
temperature flashes in the control
panel.
The temperature display shows the
highest temperature reached during the
alarm.
The alarm will sound and the display
will flash if:
– too much warm air flows into the
appliance, for example when food is
being loaded, re-arranged, or taken
out.
– large amounts of food are being
frozen at once.
– the power fails.
As soon as the alarm condition is
corrected the alarm with turn off and
the sensor button for alarm will go out.
Turning the temperature alarm Off
As soon as the alarm condition is
corrected, the alarm signal turns off
and the affected zone stops flashing in
the display. The "alarm" indicator goes
out.
^ To turn the alarm off early, press
the "alarm" sensor button.
The alarm signal turns off. The "alarm"
indicator remains on until the alarm
condition is corrected.
If the temperature in the freezer
zone reaches 0°F (-18°C) or higher,
check that food has not defrosted.
Door alarm
If the appliance door is left open, an
alarm signal will sound and the "alarm"
indicator will turn red after five minutes.
Once the door is closed the alarm will
turn off and the "alarm" indicator will go
out.
Turning the door alarm Off
To turn the alarm off early:
^ The "alarm" indicator and signal will
turn off.
The alarm will turn off and the "alarm"
indicator will go out.
Temperature and door alarm
14
Setting the temperature
^ Touch the access button "p"soit
turns yellow.
^ Use the X and Y buttons next to the
temperature display to set the
temperature warmer or colder.
Tap the X and Y sensor buttons to
raise/lower the temperature 1°, or hold
it down to move through the
temperature range more quickly.
The temperature display on the
control panel always shows the
desired temperature.
Temperature range
The temperature can be set within the
following range:
7°F to -11°F (-14°C to -24°C).
To freeze fresh food and store frozen
food for an extended period of time, a
temperature of 0°F (-18°C) is
suggested.
The room temperature and the
installation location can affect the time it
takes for the appliance to drop to the
coldest temperature. If the room
temperature is too high, it may not be
possible for the appliance to reach the
lowest temperature.
Setting the temperature
15
Temperature unit
(Fahrenheit/Celsius)
The temperature can be displayed in
degrees Fahrenheit (°F) or Celsius (°C).
^ Touch the access button "p"soit
turns yellow.
^ Note the position of the X button, but
do not touch.
^ Touch the access button "p" again so
it turns white.
Only the access button "p" is visible.
^ Place one finger on the position of
the X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button "p" once.
Keep holding the X button down until
the following appears in the display
(approx. 5 seconds).
^ Tap the X button until † appears in
the display.
^ Touch the access button "p"to
confirm.
^ By touching the X button you can
select either Fahrenheit or Celsius for
the temperature display.
†0: Fahrenheit
†1: Celsius
† –: return to menu.
^ Touch the access button "p"to
confirm the setting.
^ Tap the X button until a ; appears in
the display.
^ Touch the access button "p".
You have left the Custom settings
mode.
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
Setting the temperature
16
Freezing food
Fresh food should be frozen as quickly
as possible. This helps maintain the
nutritional value, vitamin content,
appearance and taste of the food.
Never refreeze partially or fully
defrosted food. Consume defrosted
food as soon as possible, it will lose its
nutritional value and spoil if left for too
long. Do not refreeze defrosted food
unless it has been cooked.
Before placing food in the freezer
^ When you are planning to freeze
large amounts of food (more than
4 ½ lbs [2 kg]), switch on the
SuperCool function ahead of time
(see "SuperCool").
This will provide the food already in
the freezer with a protective boost of
cold air.
Placing food in the freezer
Food to be frozen can be placed
anywhere in the freezer.
The freezer baskets can hold a
maximum of 35 lbs (16 kg) of frozen
food.
^ Spread the food to be frozen across
the bottom of the freezer basket or
across the shelves, so that it will
freeze through to the core as quickly
as possible.
^ When placing items in the freezer,
make sure the packaging and
containers are dry, to keep them from
sticking together when frozen.
When freezing, try not to let frozen
food come into contact with
unfrozen food, this could cause the
frozen food to defrost.
Using the freezer efficiently
17
Defrosting
Frozen food can be defrosted in
different ways:
– in a microwave oven,
– at room temperature,
– in the refrigerator (the cold given off
by the frozen food helps to keep the
other food cold),
– in a steam oven.
Poultry It is especially important to
observe proper hygiene when
defrosting poultry. Never save the liquid
from defrosted poultry. Drain it away
and promptly wash the container, the
sink and your hands. Danger of
salmonella poisoning.
Fruit should be defrosted at room
temperature in its packaging, or in a
covered bowl.
Most vegetables can be cooked while
still frozen. Simply place directly into
boiling water or hot oil.
Cooling drinks quickly
To cool drinks quickly, switch on the
SuperCool function. See "SuperCool" for
more information.
Do not leave bottles in the freezer for
more than 1 hour, closed containers
could burst.
Using the freezer efficiently
18
Freezing tips
– The following are examples of foods
suitable for freezing:
Fresh meat, poultry, game, fish,
vegetables, herbs, fresh fruit,
pastry/dough, leftovers, and a range
of pre-cooked meals.
– The following examples of foods not
suitable for freezing:
Lettuce, radishes, sour cream,
mayonnaise, eggs in their shells,
onions, whole raw apples and pears.
– To retain color, taste and vitamin C,
vegetables should be trimmed,
washed, and blanched.
To blanch: bring a large saucepan of
water to a boil, then submerge the
vegetables in rapidly boiling water
for 2-3 minutes, depending on type.
Remove, and plunge into ice-cold
water to cool quickly. Drain and pack
for freezing.
– Lean meat freezes better than fatty
meat, and can be stored for
considerably longer.
– To prevent chops, steaks, cutlets or
rolled meats from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer wrap.
– Do not season fresh foods or
blanched vegetables before
freezing. Cooked food can be lightly
seasoned before freezing, but care
should be taken as the taste of some
spices alters when frozen.
– Do not place hot foods or drinks in
the freezer. This causes already
frozen food to thaw, and increases
the energy consumption
considerably. Allow hot foods and
drinks to cool down before placing
them in the freezer.
Packing tips
^ Unsuitable packing material
- wrapping paper
- greaseproof paper
- cellophane
- garbage bags
- plastic shopping bags
Suitable packing material
- plastic freezer bags/wrap
- aluminum foil
- freezer containers
^ To help prevent freezer burn, expel
as much air as possible from
bags, etc., before sealing them.
^ Close the packaging tightly with
- plastic clips
- twist ties
- rubber bands
^ Mark the package to indicate the
contents and the date of freezing.
Using the freezer efficiently
19
When the SuperCool function is
activated, the appliance is cooled as
cold as possible (to a factory-preset
temperature).
SuperCool
The SuperCool function is ideal for
freezing large quantities of unfrozen
food. Ideally the function should be
switched on4-6hours before the food
is placed in the freezer.
If the max. freezing capacity is used,
24 hours are recommended.
This helps food to freeze quickly and
retain its nutrients, vitamins, flavor and
appearance.
Switching on SuperCool
^ Touch the SuperCool sensor so that
it turns yellow.
The temperature now begins to fall, with
maximum cooling performance.
The new temperature setting appears in
the display -22°F (-30°C).
Switching off SuperCool
The SuperCool function automatically
switches off after approx. 52 hours. The
sensor button turns white, and the
appliance continues running at normal
power.
To save energy, you can switch off the
SuperCool function once the food is
sufficiently chilled.
^ Touch the SuperCool sensor so that it
turns white.
The temperature display returns to the
original temperature setting.
The appliance now continues running
at normal power.
SuperCool
20
Using the Ice/Water Dispenser
for the first time
Before using the Ice/Water
Dispenser for the first time, you must
flush then fill appliance water lines
with water.
Flushing the lines of the Ice/Water
Dispenser
^ Open the freezer door.
^ Touch the "Access" button so it turns
yellow.
^ Touch the "ice" sensor button so it
turns yellow.
^ Close the appliance door.
After opening and closing the door,
it may take a few seconds before
the Ice/Water Dispenser is ready for
use.
The "water" button on the control panel of
the Ice/Water Dispenser flashes white.
^ Place a large container under the
dispenser.
^ Touch the "water" button until it
flashes yellow.
^ Touch and hold the "water" button
again.
This activates the flushing function,
which uses approximately 1.6 gallons
(6 liters) of water.
You can interrupt the flushing process
at any time to empty the container, by
taking your finger off the "water" button.
During this time, the "water" button will
flash yellow again.
As soon as the flushing process is
complete, you will hear a beep, and the
buttons on the control panel will turn
white.
You can now use the Ice/Water
Dispenser.
For the automatic ice/water
dispenser to operate, it must be
connected to the household power
and water supply.
Use sturdy glass when dispensing
water or ice - risk of injury from
broken glass!
Keep fingers clear of the dispenser
opening. Risk of injury!
Ice/Water Dispenser
21
Turning on the Ice/Water
Dispenser
Before using the Ice/Water
Dispenser for the first time, you must
flush the water lines.
^ Open the freezer door.
^ Be sure the ice cube container is
under the ice maker.
Ice cubes can only be produced if
the ice cube container is completely
closed.
^ Touch the "ice" button so it turns
yellow.
^ Close the freezer door.
The ice/water dispenser is now ready
for use.
After opening and closing the door,
it may take a few seconds before
the Ice/Water Dispenser is ready for
use and the touch controls can be
used again.
^ Turn on the Ice/Water dispenser with
a finger touch to the control panel or
by passing your hand under the
dispenser to activate it via the light
sensor.
All of the touch controls for the
Ice/Water Dispenser should now
appear white.
If this is not the case, the Safety Lock is
activated i.e. "lock" will appear yellow.
See "Safety Lock".
If "lock" is blinking, the drip tray
needs to be emptied (see "Cleaning
and care").
Once the freezer has cooled to a
freezing temperature, the ice cube
maker fills with water.
Do not place any bottles or food for
rapid cooling in the ice cube maker.
The ice cube maker could become
blocked or damaged.
Discard all ice cubes, crushed ice
and water produced during the first
24 hours after switching on the
ice/water dispenser. The water is
used for the initial flushing of the
water supply.
This applies to the first use, as well
as when the appliance has been out
of service for a long time.
Ice/Water Dispenser
22
Dispensing water
^ Place a suitable cup on the drip tray
under the ice/water dispenser.
^ Press and hold the "water" button.
As long as you hold in the "water" button,
water will flow from the dispenser.
After a period of time the water flow will
automatically stop. If more water is
needed press the "water" button again.
If you would like the water colder,
place ice cubes in the glass before
dispensing water.
Dispensing (crushed) ice
After the initial start-up it may take
up to 24 hours for the first ice to be
produced.
^ Place a suitable cup on the drip tray
under the dispenser.
^ Press and hold the "cubes" or
"crushed" button.
As long as you hold in the desired
button, ice will fall from the dispenser.
After a while dispensing will stop
automatically. Press the sensor again if
you need more ice.
Release the button when the jar is
almost full. Ice in the discharge may
cause the cup to overflow or block
the discharge.
The ice cube maker can produce
approx. 150 ice cubes within 24 hours.
Note: Ice production will vary due to
your water supply temperature,
pressure and hardness.
The amount of ice cubes produced
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes will be
produced in a given period of time.
As soon as the drip tray indicator
signals that the drip tray is full, the
current operation will automatically
stop.
Empty out the drip tray using a
sponge or dish towel.
The ice dispenser produces a max. of
150 ice cubes per 24 hours.
The production volume of ice depends
on the temperature in the freezer. The
lower the temperature the more ice that
will be produced in a certain period of
time.
If the "lock" flashes the drip tray
needs to be emptied and the
dispensing is automatically stopped.
Empty the drip tray using a sponge
or towel.
Ice/Water Dispenser
23
If the ice/water dispenser is not
used for more than 2 minutes or the
freezer door is opened, Standby
mode is activated and the lighting
for the ice/water dispenser will go
out.
When used again, it will take a few
seconds for the water and ice to be
dispensed.
Safety lock
The Ice/Water dispenser can be locked
to prevent unwanted use.
^ Touch the "lock" button so it turns
yellow.
The Ice/Water dispenser buttons are
now locked.
To unlock the buttons:
^ Touch the "lock" button so it turns
white.
Lighting
In order to turn the Ice/Water dispenser
lighting on or off:
^ Touch the "light" button so it turns
yellow (lighting on) or white (lighting
off).
If the Ice/Water dispenser is not
used for longer than 2 minutes, it
switches into standby mode, and
the Ice/Water dispenser lighting
turns off.
Turning off the Ice/Water
dispenser
The water supply line must be shut
off several hours before the
appliance or ice maker is switched
off.
^ Open the freezer door.
^ Touch the sensor button for the ice
maker so that it turns white.
Ice/Water Dispenser
24
Settings
The following settings on the Ice/Water
dispenser can be adjusted:
Entering the settings mode
^ Touch and hold the "lock" button so
that it appears white.
^ At the same time tap the "light" button
(do not hold down).
^ Hold the "lock" button for approx. 4
seconds until the "lock" and "light"
buttons turn yellow.
The lighting color of other buttons
indicates their On/Off setting.
Yellow (On)
White (Off)
^ Release both buttons.
Anti-condensation heater
A heater behind the control panel of the
Ice/Water dispenser ensures that frost
and ice do not build-up. To save
energy, you can turn the heater off.
This feature is turned off by factory
default.
To turn the anti-condensation heater on:
^ Touch the "water" button until it turns
yellow.
Ice/Water Dispenser
25
Anti-clumping
The anti-clumping feature ensures that
crushed ice or ice cubes do not freeze
together. A noise will be heard
periodically to indicate that the feature
is working. If the sound disturbs you,
the feature can be turned off.
Note: Disabling the anti-clumping
feature can result in the formation of
ice clumps in the dispenser.
This feature is turned on by factory
default.
To turn the anti-clumping feature off:
^ Touch the "cubes" button until it turns
white.
Button sound
If you prefer the buttons to be silent
when touched, the button sound can be
turned off.
This feature is turned on by factory
default.
To turn button sound off:
^ Touch the "crushed" button until it
turns white.
Exiting the settings mode
^ Touch the "light" button or do not
touch any buttons for one minute.
Ice/Water Dispenser
26
The freezer defrosts automatically.
The moisture generated in the
appliance collects in the evaporator. It
is automatically defrosted and
dissipated by the condenser
periodically.
This automatic defrosting system
enables the freezer to remain
permanently ice-free, while ensuring
that the food stored in the freezer stays
frozen.
Automatic defrost
27
Moving the shelves
The shelves can be adjusted according
to the height of the food.
^ Using both hands, grasp the shelf
from underneath and lift slightly so
that the rear of the shelf is slightly
above the mountings.
^ Pull the shelf forward.
^ Move the shelf to the desired height,
then insert the (rear) hooks into
place.
^ Make sure the shelf is level.
Door shelf
For easier loading, unloading and
cleaning the door shelf can be shifted
or completely removed.
^ Using both hands, grasp the door
shelf by the frame, lift it upward a bit,
then tip it slightly forward.
^ Slide the tipped shelf up or down
along the side-rails, and click it back
into place at the desired location.
^ Make sure that the basket is level.
Removing the door shelf:
^ Slide the shelf upwards all the way to
the top of the side-rails until it can be
removed.
Replacing the door shelf:
^ Insert the freezer basket at the top of
the side-rails and slide it down into
the desired position.
Adjusting the interior fittings
28
Freezer baskets
For easier loading, unloading, and
cleaning, the freezer baskets can be
shifted or completely removed.
^ Pull the basket forward until
resistance is felt.
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
^ Using a suitable object, turn the
safety lock to a horizontal position a.
^ On both sides of the basket, pull the
latches b upward and lift the basket
out of the freezer.
Replacing the freezer basket
^ Fully extend the telescopic tracks.
^ Lay the basket onto the tracks so that
it connects in the front and back.
^ Turn the safety lock back to the
vertical position.
^ Slide the freezer basket in.
Adjusting the interior fittings
29
To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids,
chlorides or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner (available
from Miele).
Only use a mild solution of warm
water and liquid dish soap to clean
this appliance.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
Do not allow water to get into the
electronic unit or lights.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
– solvent based cleaning agents
– stainless steel cleaners
– cleaners containing descaling
agents or lime removers,
– abrasive cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
– glass cleaners,
– metal scrapers,
– eraser sponges,
– steam cleaning products.
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Cleaning and care
30
The stainless steel doors have a
special coating that is soil-resistant.
Do not wipe these with a stainless
steel conditioner, it will leave visible
streaks.
The drip tray, outlet, rear wall
andcasing of the ice/water dispenser
are coated with a high-quality finish.
This coating protects them from
soiling and makes cleaning easier.
Do not treat the drip tray, outlet, rear
wall and casing of the ice/water
dispenser with stainless steel
cleaning agents, they will damage
the coating. Stainless steel
conditioners will leave visible
streaks!
Do not clean the drip tray and outlet
of the ice/water dispenser in the
dishwasher. This will damage the
coating.
Do not attach any magnets. The
surface is susceptible to scratches.
Do not use sticky notes, or any type
of tape or adhesive on the coated
surface. These will damage the
surface, causing it to lose its dirt
repellent protective coating.
Remove any soiling immediately if
possible. If soiling is left untreated, it
may become impossible to remove
and the surface may show changes
or discoloration.
Before cleaning
^ Use the main switch to turn the
appliance off completely.
The main switch is located on the right
side underneath the control panel.
^ Unplug the power cord.
^ Remove any food from the appliance
and store it in a cool place.
^ Take out any removable parts,
e.g., shelves, baskets.
Cleaning and care
31
Cleaning the interior and
accessories
Use a mild solution of warm water and
liquid dish soap. Wash all accessories
and drawers by hand. Do not wash in a
dishwasher.
^ Clean the appliance as needed.
^ After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance door open for a
short time, so the moisture can
evaporate.
Appliance doors
Remove soiling on the appliance
doors and side walls right away. If
soiling is left on, it may become
diffficult to remove and the surfaces
may discolor.
All surfaces are susceptible to
scratches. All surfaces may become
discolored when they come into
contact with unsuitable cleaning
materials.
^ Clean the surface with a soft sponge,
liquid dish soap and warm water. A
clean, damp microfiber cloth may
also be used, without a cleaning
agent.
^ After cleaning, rinse everything with
clean water, then dry with a soft
cloth.
Additional instructions for stainless
steel appliances:
– Appliance doors
The appliance doors are finished with a
high-quality surface coating. It protects
them from soiling and makes cleaning
easier.
Do not treat appliance doors with
stainless steel cleaning agents:
This will damage the coating!
Aluminum frames
The frames of the door bins and
shelves are made of aluminum.
^ Clean with a mild solution of warm
water and liquid dish soap.
Aluminum is susceptible to
scratches and nicks, treat with care.
The aluminum frames may become
discolored or otherwise altered if
soiling is not cleaned away
promptly.
Do not use stainless steel cleaners;
lime removers; scouring pads, such
as pot scrubbers; or used sponges
that still contain abrasive cleanser
residue to clean the frames.
Cleaning and care
32
Ice cube container
^ Pull out the ice cube container.
^ Empty and clean the ice cube
container with lukewarm water.
^ Thoroughly dry the container and the
anti-clumping screw to prevent new
ice cubes from sticking.
^ To re-insert push the ice cube
container all the way back onto the
supports until it locks into position.
^ If the container cannot be pushed all
the way back, twist the anti-clumping
screw in the container.
Drip tray
The drip tray collects excess water.
As soon as the drip tray is full, the "lock"
button on the Ice/Water dispenser
control panel will flash. A sensor
located in the drip tray detects when
the drip tray is full.
The drip tray must be emptied and
cleaned. However, to prevent odors,
the drip tray should be cleaned daily.
When the "lock" button flashes yellow:
^ Remove the drip tray cover.
^ Empty and clean the drip tray using a
sponge or kitchen towel.
^ Replace the tray cover.
The "lock" button is now white again.
Ventilation slits
^ Check the ventilation slits in the base
panel regularly. Remove any
dirt/dust with a vacuum cleaner or
brush. Clean as needed.
Door seals
Do not use any oils or grease on the
door seals. This may cause the
seals to deteriorate and become
porous over time.
^ Clean the door seals with warm water
and dry thoroughly.
After cleaning
^ Return all shelves and accessories.
^ Plug in the appliance and turn it on
with the main switch.
^ Switch on the SuperCool function.
The freezer section will cool down
quickly.
^ Once the temperature is cold
enough, place the freezer baskets
containing the frozen food into the
freezer.
^ Turn off the SuperCool function on a
temperature of 0 °F (-18 °C) is
reached.
Cleaning and care
33
Changing the light bulb
The lighting automatically switches off
after the door has been open for
approx. 10 minutes. This is not a fault.
If the light does not come on when the
door is opened briefly, the light bulb
should be changed.
^ Use the main switch to turn the
appliance off.
To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.
Upper lighting
^ Grasp the front of the light cover with
both hands, and slide it back.
^ Carefully pull the cover forward and
out.
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold with a soft cloth.
^ Remove the defective light bulb.
^ Place the new bulb in the socket.
Halogen bulb type:
20 W/12 V/socket GY 6.35.
^ Slip the rear of the light cover back
into position, then pull it forward and
into place.
Cleaning and care
34
Side lighting
^ Turn the light cover counterclockwise
and pull out.
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold with a soft cloth.
^ Pull the defective light bulb from the
socket.
^ Place the new bulb in the socket.
Halogen bulb type:
5 W/12 V/socket G 4.
^ Put the light cover back on and turn
clockwise into place.
^ Restore power to the appliance.
Ice/Water Dispenser lighting
Do not remove the light cover for the
dispenser lighting. Should the
lighting covers be damaged or need
to be removed due to damage, do
not look directly or with an optical
instrument at the lighting.
The lighting automatically switches off if
the dispenser is not used for an
extended period of time. This is not a
fault.
If the light does not come on when the
dispenser is used again, the light bulb
should be changed.
The dispenser lighting should only
be repaired or replaced by Miele
Technical Service.
Cleaning and care
35
The appliance is supplied with an
active charcoal filter which improves
the taste and smell of ice cubes by
removing chlorine and other
substances from the incoming tap
water.
Additional water filters are available
from Miele.
It is important to change the water
filter regularly.
To avoid serious illness or death, do
not use water that is
microbiologically or chemically
unsafe or of unknown quality without
adequate disinfection or other
treatment before or after use of a fil-
ter.
Note:
– After installing a new water filter and
switching on the ice maker, discard
the first 24 hours' worth of ice
production.
– If the ice maker has not been used
for a prolonged time discard any ice
cubes in the freezer, empty the
container and discard the ice
production of the next 24 hours.
– If the appliance or ice maker have
not been routinely used for several
weeks or months, or if the ice cubes
have an unpleasant odor, change
the water filter.
Water filter change indicator
The change indicator will appear
approx. every 6 months depending on
the quantity of ice produced.
– When the filter indicator lights red,
this is an indication that a filter
change will soon be necessary.
New water filters (Bypass and Active
charcoal filters) are available from
Miele.
^ When the filter indicator flashes red in
the display the filter must be
changed.
Water filter
36
Exchanging the water filter
Note: Air trapped in the system may
cause water and the filter cartridge
to eject forcefully. Use caution when
removing.
^ Push in and rotate the filter cap on
the base panel of your appliance
counterclockwise 180°, 1.
^ Pull the used filter cartridge out of the
appliance, 2.
^ Remove the cap from the used filter,
3.
^ Take a new filter cartridge out of the
packaging and remove the protective
cap.
^ Push the cap onto the new filter
cartridge, 4.
^ Push the filter cartridge with cap, in a
horizontal position, all the way into
the opening in the base panel, 5.
^ Rotate the filter cartridge clockwise
180° until the cap is in a horizontal
position, 6.
Water filter
37
^ After the filter change the filter
indicator in the display still flashes.
The change must be be confirmed in
the electronic.
Water filter
38
Water filter
39
Confirming the filter change
^ Press and hold the filter change
sensor button.
^ At the same time place a finger on
the access button. Press and hold
both sensor buttons for approx. 5
seconds until a beep is heard.
The water filter change has been
confirmed and the filter change
indicator had been reset.
The filter change indicator goes out.
^ Close the door.
After installing a new water filter
discard the first 24 hours of ice
production.
Using an external water filter
If your household water supply already
has an external water filter installed,
leave the standard water filter (bypass
cartridge) installed in the appliance.
Water filter
40
Performance Data Sheet
Model: Miele 07134220
Use Replacement Cartridge 07134220
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for
water leaving the system as speci ed in NSF/ANSI Standard 42 and Standard 53.
System tested and certi ed by NSF International against NSF/ANSI Standard 42 and Standard 53 for the reduction of the claims
speci ed on the Performance Data Sheet.
Capacity 739.68 Gallons (2800 Liters)
Contaminant Reduction Determined by NSF testing.
Substance Reduction
Average
In uent
NSF speci ed
Challenge
Concentration
Avg %
Reduction
Average Product
Water
Concentration
Max Permissible
Product Water
Concentration
NSF Reduction
Requirements
NSF Test
Report
Chlorine Taste and Odor 2.1 mg/L 2.0 mg/L ± 10% 97.6% 0.05 mg/L N/A ≥ 50% J-00121313
Nominal Particulate Class I,
≥0.5 to < 1.0 μm
9,100,000 pts/
mL
At least 10,000
particles/mL
98.8% 111,817 pts/ml N/A ≥85% J-00099871
Cyst* 170,000 cysts/L
Minimum 50,000
cysts/L
99.99% 0.001 cyst/L N/A ≥99.95% J-00109715
* Based on the use of Cryptosporidium parvum oocysts
FOR RESIDENTIAL USE ONLY
Application Guidelines/Water Supply Parameters
Service Flow 0.75 gpm (2.83 lpm)
Water Supply Potable Water
Water Pressure 30 -120 psi (207 – 827 kPa)
Water Temperature 33ºF - 100ºF (0.6ºC - 38ºC)
WARNING
Read entire manual. Failure to follow all guides and rules could cause personal
injury or property damage.
• Check with your local public works department for plumbing codes. You must
follow their guidelines as you install the water ltration system.
• Your water ltration system will withstand up to 120 pounds per square inch
(psi) water pressure. If your water supply pressure is higher than 80 psi, install a
pressure reducing valve before installing the water ltration system.
To reduce the risk associated with the ingestion of contaminants:
• DO NOT use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system. Systems certi ed for
cyst reduction may be used on disinfected water that may contain lterable
cysts.
It is essential that the manufacturer’s recommended
installation, maintenance and lter replacement
requirements be carried out for the product to perform as
advertised. See Installation Manual for Warranty information.
Note: While the testing was performed under standard
laboratory conditions, actual performance may vary.
Replacement Cartridge: 07622430
For estimated costs of replacement elements please contact
your local dealer, go to www.miele-shop.com or call
Tel. 0180 31 31 340 (€ 0,09/Min.).
NOTICE
To reduce the risk associated with water leakage or ooding:
• Read and follow Use Instructions before installation and use of this system.
• Change the disposable lter cartridge every six months or sooner if you observe
a noticeable reduction in water ow rate.
• Failure to replace the disposable lter cartridge at recommended intervals may
lead to reduced lter performance and failure of the lter, causing property
damage from water leakage or ooding.
• For questions or concerns, please contact Customer Service at
Tel. 0180 31 31 340 (€0,09/Min.).
3M is a trademark of 3M Company used under license.
NSF is a trademark of NSF International.
© 2017 3M Company. All rights reserved.
34-8721-1445-8
Manufactured by:
3M Puri cation Inc.
3130 Lexington Avenue South,
Eagan, MN 55121
This product F 1473 SF (KIMIWD18US) is tested and certified by WQA against
NSF/ANSI 372 for "lead free" compliance.
Miele & Cie. KG
Carl-Miele-Straße 29
D-33332 Gütersloh
Lead free certificate
41
With the aid of the following guide minor problems can be corrected without a ser-
vice call.
Repairs should only be carried out by a qualified and trained person in strict
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage and may void the warranty.
Problems with temperature
Issue Possible fault Solution
The freezer
does not get
cold.
The machine is not turned
on.
Check whether the appliance is
turned on at the main switch. The
access button must be lit up.
The machine is not
plugged in.
Check that the plug is correctly
inserted in the power outlet.
Check that the fuse has
not tripped.
Reset the circuit breaker.
If the breaker trips again the
appliance or the outlet may be
defective. Contact Miele or a
qualified electrician.
The temperature is set
incorrectly.
Check the display.
The
temperature is
too low.
Select a warmer
temperature.
See "Selecting the correct
temperature".
The SuperCool function is
still on.
SuperCool automatically shuts off
after 52 hours.
The door is not closed. Check that the door has been
closed properly.
A large amount of food is
being frozen at the same
time.
This makes the compressor run
longer, causing the temperature to
fall automatically.
The freezer is
too warm.
The room temperature is
lower than the ambient
temperature for which the
appliance is designed.
Raise the temperature of the room.
Operating the appliance in a room
that is too cold will cause the
cooling system to switch off for too
long, causing the freezer section to
become too warm.
Frequently asked questions
42
General problems
Issue Possible fault Solution
Water is flowing out of
the appliance.
Close the shut-off valve immediately.
Check whether the water
pipe in the appliance is
defective.
Contact Miele Technical
Service.
Check whether the water
pressure is too low.
Contact a plumber.
Check whether the correct
water valve has been
installed.
Self-tapping valves and
3/16" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
The door will not
open.
This is not a fault.
The suction caused by
opening and closing the
door too many times in
succession prevents it
from opening.
Wait a few minutes, then
try again. It should now
open without force.
The compressor kicks
on very frequently and
for too long.
The ventilation slits are
covered or dusty.
Clean with a vacuum or
brush.
The door has been
opened too frequently, or a
large amount of unfrozen
food has been put in at
once for freezing.
Once the freezer gets
down to the set
temperature the
compressor will turn off.
The door is not closed. Check that the door has
been closed properly.
The freezer runs
continuously.
To save energy the compressor runs at a lower speed,
but for longer when less cooling is required.
The temperature
reading in the freezer
shows -18°C, although
a higher temperature
is set.
This is not abnormal. When the ice maker is in use and
the temperature of the room is above freezing the
temperature automatically stays at -18°C to ensure
proper functioning.
Frequently asked questions
43
Alarm / Indicator warnings
Issue Possible fault Solution
The alarm is going off. The appliance door(s)
have been open for
longer than 5 minutes.
Close the door.
The alarm is ringing and
the "alarm" indicator is
flashing.
The door is not closed. Once the alarm condition
has been corrected, the
alarm will turn off and the
"alarm" indicator will go
out.
The temperature indicator
will indicate the highest
temperature reached
during the alarm. Check
that food has not
defrosted.
A large amount of fresh
food is being frozen at the
same time.
There has been a power
failure.
The filter display is red. This is a warning that the
water filter needs to be
changed soon.
Order replacement filters
from Miele.
The filter display is
flashing red.
The water filter needs to
be changed.
See "Exchanging the
water filter".
The "Lock" indicator
flashes in the display.
The drip tray for the
Ice/Water Dispenser is
full.
Empty the drip tray by
soaking up the water with
a sponge or dish cloth.
The control panel has
fogged up.
The heating element
behind the panel is
turned off.
See "Anti-condensation
heater" for more
information.
Problems with the ice/water dispenser
Issue Possible fault Solution
The ice maker will not
switch on.
The appliance is not
plugged in.
Check that the appliance
is connected to the power
supply.
After turning on the
Ice/Water dispenser it is
not working.
This is not a fault. After opening and closing the door
it can take a few seconds to operate.
Frequently asked questions
44
Problems with the ice/water dispenser
Issue Possible fault Solution
The ice maker is
not producing
any ice.
When the appliance is turned on for the very first time, it can
take up to 10 hours for the first ice cubes to drop out of the ice
cube maker and collect in the container.
The appliance is not turned on. Check that the appliance
is switched on.
The water supply line was not
primed (purged of air) before the
appliance was used for the first
time.
Contact Miele.
Check if:
– the Ice/Water dispenser is
switched on.
– the Safety Lock is turned on.
– the water supply line is open.
– there are ice cubes stuck
together and blocking the exit.
– the ice cube container is in the
right position.
– the freezer compartment
temperature is too high.
– the water pressure is too low. The
water pressure must be between
25 and 80 psi (1.7-5.5 bar).
See "Ice/Water
Dispenser" and/or
"Plumbing" for more
information.
Check whether the correct water
valve has been installed.
Self-tapping valves and
3
/
16
" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
Check if the Anti-clumping feature
is activated. This will ensure that
crushed ice or ice cubes do not
freeze together.
See "Anti-clumping".
Frequently asked questions
45
Problems with the ice/water dispenser
Issue Possible fault Solution
The ice cubes are
small.
Other domestic appliances
that use water are in
operation.
Avoid using such items as a
dishwasher, washing
machine or shower at the
same time.
Check whether the water fil-
ter needs changing.
See "Water filter" for more
information.
Check the water pressure.
The water pressure must be
between 25 and 80 psi
(1.7-5.5 bar).
Consult a plumber.
Check whether the correct
water valve has been
installed.
Self-tapping valves and
3
/
16
"
(4.76 mm) saddle valves
reduce the water pressure
and can block the pipe.
The Ice/Water has
an unpleasant
odor/flavor.
When ice is stored for an
extended period it may
absorb odors, which affects
the taste.
Use the ice maker more
frequently.
Check if the ice cube
container is dirty.
Clean the container.
Unsealed packages in the
freezer will transfer
odor/flavor particles to the
ice cubes.
Check that food has been
packed in airtight
containers.
The Ice/Water
dispenser is not
producing ice or
water.
The Safety Lock is activated. See "Ice/Water Dispenser -
Safety Lock".
Frequently asked questions
46
Problems with the ice/water dispenser
Issue Possible fault Solution
The ice maker is not
producing enough ice
or the ice cubes are
misshapen.
Check the water
pressure. The water
pressure must be
between 25 and 80 psi
(1.7-5.5 bar).
Contact a plumber.
Check that the freezer
temperature is not too
high.
See "Selecting the correct
temperature".
Change the water filter. See "Water filter".
The Ice/Water dispenser
does not appear to be
running.
The appliance is not
plugged in.
Check that the appliance
is connected to the power
supply.
Check that the freezer is
connected to the water
supply.
See "Plumbing".
The freezer temperature
is too high.
See "Setting the
temperature".
Ice is forming in the
supply hose to the ice
maker.
Check the water
pressure. The water
pressure must be
between 25 and 80 psi
(1.7-5.5 bar).
Contact a plumber.
Check whether the
freezer compartment
temperature is too high.
See "Selecting the correct
temperature".
A noise is heard
periodically from the
Ice/Water Dispenser.
The Anti-clumping feature
is activated.
See "Anti-clumping" for
more information or to
deactivate.
Frequently asked questions
47
Normal noises What causes them
Brrrrr... This noise may get louder for brief periods when the motor
kicks on.
Blub, blub.... A gurgling noise can be heard when the refrigerant circulates
through the pipes.
Click.... Clicking sounds occur whenever the thermostat turns the
motor on or off.
Sssrrrrr.... In multi-section and frost-free appliances, the movement of
air circulating through the appliance can sometimes just
barely be heard.
In appliances with a water tank, a humming noise can be
heard when the water pump is running.
Crack... A cracking noise can be heard when the appliance materials
expand.
Keep in mind that a certain amount of noise is unavoidable (from the compressor
and the refrigerant circulating through the system).
Noises that you
can easily
eliminate
Possible cause Solution
Rattling, clinking The appliance is not level. Realign the appliance using a
level, by raising or lowering
the screw feet underneath the
appliance.
The appliance is touching
another appliance or piece of
furniture.
Move it away.
Drawers, baskets or shelves
are jiggling or are stuck.
Check all removable items
and refit them correctly.
Bottles or containers are
touching.
Separate them.
The transport cord clips are
still hanging on the back of the
appliance.
Remove the cord clips.
Noises
48
In the event of a fault which you cannot
correct yourself, please contact
– your Miele dealer
or
– Miele Technical Service.
See back cover of the this manual
contact details.
When contacting Miele Technical Ser-
vice, please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Warranty
For additional information, please refer
to your warranty booklet.
See the end of these operating and
installation instructions for this
telephone number.
MieleCare
(USA only)
MieleCare, our Extended Service
Contract program; gives you the
assurance of knowing that your
appliance investment is covered by 5
years of worry-free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory-trained professionals can
guarantee the safety, reliability and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by the Miele Ser-
vice department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
http://www.mieleusa.com/Ser-
vice/ExtendedContracts
After sales service
49
50
Installation Instructions
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and machine damage
read these instructions
before
installation or use.
51
Disposing of the packaging
materials
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children. Return
the packaging to your dealer.
Disposal of your old appliance
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Please take care not to damage the
pipework while the appliance is being
stored for transport to a waste disposal
facility.
By protecting the pipework, you help
keep the coolants and compressor oil
from contaminating the environment.
Before discarding an old appliance
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
Caring for the environment
52
Have the appliance installed by a
qualified technician, according to
the enclosed installation
instructions.
WARNING
This appliance is top-heavy and
must be secured to prevent it from
tipping forward.
Keep the door closed until the
appliance is completely installed
and secured as per the installation
instructions.
Empty weight of your machine:
F 1473 SF ..........364lbs(165 kg)
Climate Range
The appliance is designed for use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Climate
range
Ambient room temperature
SN
N
ST
T
+50°F (10 °C) to +90°F (32 °C)
+60°F (16 °C) to +90°F (32 °C)
+60°F (16 °C) to +100°F (38 °C)
+60°F (16 °C) to 110°F (43 °C)
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal
temperature in the appliance to rise
with the risk of food deteriorating and
going off.
Installation site
The appliance should be installed in a
dry, well ventilated room.
Do not install the appliance:
- outdoors,
- in an environment with dripping
water,
- in rooms which are at risk of frost.
The installation location should not be
exposed to direct sunlight, nor near a
heat source, such as an oven,
radiator, etc.
The ambient temperature should not
drop below 55°F (13°C) or rise above
110°F (43°C), otherwise malfunctions
may occur.
If installation next to a heat source is
unavoidable observe the following
minimum distances from the heat
source:
–1
1
/
4
" (3 cm) from an electric cooktop
or electric oven.
– 12" (30 cm) from a gas or oil
cooktop, range or oven.
The following should also be taken into
consideration:
– The electrical outlet must be easily
accessible in case of an
emergency,not concealed behind
the appliance.
– The plug and cord must not touch
the rear of the appliance as they
could be damaged by vibrations
from the appliance.
– Do not plug in other devices behind
this appliance.
Installation
53
Important! When there is high
humidity a build-up of condensation
on the outer surfaces of the
appliance can occur.This can cause
the surfaces to corrode.To prevent
this, it is advisable to install the
appliance in a dry and/or an
air-conditioned room with sufficient
ventilation.Please ensure that doors
close and seal properly after
installation and that the appliance is
installed in accordance with these
installation instructions and and with
the required ventilation openings.
– If the room is too cold, it will cause
the cooling system in the appliance
to remain off for too long.This can
cause the temperature in the
appliance to rise, resulting in
damage.
Installation
54
Base
A fully loaded appliance is very heavy.
The load-bearing capacity of your floor
must meet the following requirements.
The approx. weight of a fully loaded
machine is:
F 1473 SF ..........558lbs(253 kg)
To ensure that the appliance is installed
securely and functions properly, the
base must be flat, level and made of a
hard, rigid material.
If in doubt, contact Miele.
Furniture/fixtures
The new appliance will be mounted
securely to adjacent and overhead
furniture/fixtures.
For this reason it is essential that all
attachable furniture/fixtures are
connected securely to the base or the
wall by suitable means.
Ventilation
The air intake and outlet must not be
blocked or covered in any way. They
also need to be dusted/cleaned on a
regular basis.
Installation niche
To ensure safe, trouble-free installation
and the best possible cosmetic result,
check to be sure that the installation
space complies with the installation
dimensions. See "Niche dimensions".
The side walls of the installation cavity
must be plumb.
The minimum thickness of the side
walls and the top wall must be
5
/
8
"
(16 mm).
The minimum thickness of the toe-kick
panel must be ½" (13 mm). A thickness
of
3
/
4
" (19 mm) is recommended.
Installation
55
Stainless steel panels
Stainless steel door panels and toe-kick
covers are available from Miele.
Installation options
There are many different installation
options. You are limited only by the
design of the kitchen.
The door hinge cannot be
exchanged.
Single column
The appliance can be installed at any
preferred location in the kitchen.
However, be sure the door will open
and close properly in the chosen
location.
Side-by-side
This appliance can be installed
"side-by-side" with another
fridge/freezer using a "Merging Kit".
The "Merging Kit" is available from
Miele.
Contact Miele or your dealer for
specific information about which
combinations will work with your
appliance.
For instructions on how to attach the
appliances and install the heating
mat, please refer to the instructions
included with the "Merging Kit",
available from Miele.
Installation without a partition using
the "Merging Kit"
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together
using the "Merging Kit".
Installation
56
Installation with partition using the
"Merging Kit"
The minimum thickness of the partition
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
The "Merging Kit" will also be needed.
The "Merging Kit" is available from
Miele.
Installation with partition without
using the "Merging Kit"
If there is a partition with a thickness of
more than 6
5
/
16
" (160 mm) between
the adjacent appliances, then each
appliance should be individually
installed within its own niche using the
mounting accessories included (the
"Merging Kit" is not necessary).
Installation
57
Side panels
If one side of the appliance is visible, a
side panel must be used.
The side panel must be firmly secured
to the wall, the floor and the overhead
furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are
taken from the opposite wall of the
installation space. During installation,
ensure that the cavity is square and the
measurements are correct.
Door dimensions (open 115°)
Miele recommends using the full door opening angle of 115° for this freezer.
Installation
59
9 2/16"
(234 mm)
115
°
0
Niche dimensions
Installation
60
E*: The position of the electrical connection should not be higher than 9" from the
floor.
W*: The position of the 1/4" water supply (not included) should not be higher than
2" from the floor.
Please notice:
Miele recommends to place the electrical outlet next to the appliance. The
electrical outlet must be easily accessible in case of an emergency!
�
E*
W*
Before you begin
Read these instructions completely
and carefully.
Have the appliance installed by a
qualified technician, according to
the enclosed installation
instructions.
To reduce the risk of injury or
damage to the product, two people
should be used for installation.
These installation instructions are
intended for use by qualified installers.
In addition to these instructions, the
appliance must be installed in
accordance with all local codes, or in
the absence of a local code.
– In the USA, in accordance with the
National Electric Code,
ANSI/NFPA 70 - latest edition/State
and Municipal codes and/or local
codes.
– In Canada, in accordance with the
Canadian Electric code C22.1 - latest
edition/Provincial and Municipal
codes and/or local codes.
Tools needed for installation
– Cordless screwdriver
– Torx screwdriver (TX 20)
– Hammer drill
– Wood drills in different sizes
– Hammer
– Rachet 5/16" (8 mm)
– Adhesive tape
– Multi-grip pliers
– Level
– Tape measure
– Square
When fastening the cabinet to the wall
behind it (see "Installing the appliance")
use:
– suitable plugs/screws depending on
the type of wall.
– several mounting brackets, if required.
Other
– Stepladder
– Dolly, hand truck
– Wooden beam (cross section
min. 3" x 4" [75 mm x 100 mm] as an
alternative tilt protection, length
depends on the width of the
installation cavity)
– Wood screws in different sizes
Optional accessories
– "Merging Kit" f
or side-by-side installation
Installing the appliance
62
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
– The side panels of the housing must
be even.
– The housing unit panels must be at
least 16 mm thick.
– The plinth facing must be at least 13
mm thick (or preferably 19 mm).
Check the installation niche
To ensure a safe, trouble-free
installation and the best possible
cosmetic result, check to be sure
that the installation space complies
with the installation requirements.
^ Check the base (see "Installation").
^ Check the dimensions of the cavity.
^ Check that the cavity is square.
^ Check the location of the power
outlet.
^ Check the location of the water
connection (see "Plumbing").
^ Check that all furniture parts in the
vicinity of the appliance are securely
connected to the wall.
^ Check that the adjacent
furniture/fixtures do not collide with
the open door.
Before installation
,
Caution - the appliance is very
heavy. Use caution when unpacking
and opening the door, danger of
tipping.
^ To protect the base from damage
during installation, attach a hard
board, linoleum, etc., to the floor in
front of the intended installation
location.
^ Take the supplied accessories out of
the protective packaging.
Installing the appliance
63
There are transportation safety
devices inside the appliance to
protect the shelves and storage
compartments until installation is
complete. Do not remove them,or
parts may be damaged.
^ Check the appliance for damage in
transit.
Do not install the appliance if it is
visibly damaged. If in doubt, contact
your dealer.
^ Loosen the bracket that holds the
appliance to the pallet.
Caution! The appliance is no longer
secured and may be unstable.
^ From the rear of the appliance
carefully lift it from the pallet.
Once the appliance is on the ground it
can be wheeled around.
Installing the appliance
64
Preparing
the installation
niche
,
Keep the appliance door closed
until it is securely fastened in the
niche. Tipping hazard.
Because of the size and weight of
the appliance, it is essential to
ensure that the appliance cannot tip
over once it has been mounted in
the niche.
Installing the appliance
65
Mounting Accessories
The mounting accessories needed for
installing the appliance into the niche
are included in the packaging. Several
plastic bags are included which are
marked alphabetically.
The bag needed for each step will be
marked with its respective letter.
Anti-tip brackets
The anti-tip brackets a keep the
appliance safely secured in the
installation niche b and prevent it from
tipping.
,
Risk of tipping
The installation niche must be
securely attached to the wall behind
it. This is the only way the
appliance, which is later secured in
the niche, can be prevented from
tipping!
Two anti-tip brackets are
recommended for each appliance. For
side-by-side installations 4 brackets are
recommended.
^ Position the anti-tip brackets on the
left and right in the installation niche
so that there is no more than 3/8"
(10 mm) of space between the
brackets and the side walls.
^ Mark the drill holes in the anti-tip
brackets on the back wall and on the
ceiling of the installation niche.
^
Set the brackets aside - they will be
needed again later.
Assure that there are no electrical
wires or plumbing in the area which
the screws could penetrate - risk of
injury and damage.
Screws for various applications and
types of material are supplied in the
packaging.
If these are not suitable for the
anti-tip mechanism in your
installation, you will need to use
alternative means to secure it.
Installing the appliance
66
^
Now attach the installation niche to
the wall.
The built-in cabinet must be secured to
the wall behind it with several screws.
In a cabinet with a back wall
^ screw the back wall of the cabinet in
several places directly to the wall
behind it.
For this, use suitable plugs/screws
depending on the type of wall.
In a cabinet without a back wall
^ screw the cabinet to the wall behind
it in several places using suitable
mounting brackets.
For this, use suitable plugs/screws
depending on the type of wall.
Installing the appliance
67
Securing an alternative anti-tip
device
If the anti-tip brackets cannot be
attached securely using a wooden
beam, an alternative anti-tip device can
be used.
Ensure that there is no "give" between
the appliance and the anti-tip device.
If possible, always screw the
wooden beam to existing studs.
–
The wooden beam must be at least .
3" x 4" [75 mm x 100 mm] thick.
–
The length is equal to the width of
the installation niche.
–
If the installation niche is deeper than
the appliance, use a thicker wooden
beam or attach two beams.
–
The beam must cover the appliance
by at least 2" (50.8 mm).
^
Mark the installation height (lower
edge of the beam) on the rear wall of
the niche.
^
Select screws according to the
thickness of the wooden beam.
Determine the number of screws
based on the niche width, to ensure
that the beam will be attached
securely.
^
Locate wall studs near the rear wall
of the niche and mark the drill holes
in the beam accordingly.
^ Pre-drill the wooden beam.
^ Attach the wooden beam to the rear
wall of the niche.
Now prepare the water connection
from the appliance to the main
supply line (see "Plumbing").
Installing the appliance
68
Sliding the appliance into the
installation niche
If a side-by-side installation is
desired, connect the two appliances
together. See the Installation Manual
included with the "Merging Kit".
^ Unscrew the plinth.
^
To protect the corners of the
installation space, attach edge
protectors where needed (not
included).
^
Plug the appliance into the power
outlet a.
The plug of the appliance should be
easily accessible after installation.
If the plug is not accessible after the
appliance has been installed,
disconnection from the power
supply should be completed via the
circuit breaker.
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
^ To prevent the power cord from
becoming caught:
Tie a piece of string to the middle of
the power cord and feed it forward
under the appliance. When sliding
the appliance in, pull the cable
forward b.
^ Carefully slide the appliance into the
space.
If resistance is felt when attempting to
slide the appliance into the installation
niche - for example, because the floor
is uneven,
^
Turn the rear adjustable wheels slightly
outward (see "Aligning the appliance"),
then push the appliance in.
Be careful not to damage the water
pipe or power cord attached to the floor.
^
Remove the edge protectors.
Installing the appliance
69
Aligning the appliance
^
Align the appliance with the
surrounding cabinets.
The height-adjustable feet at the front
and rear can all be adjusted from the
front:
– Front feet:
Adjust with a rachet 5/16" (8 mm) c.
– Rear feet:
Adjust with a (cordless) screwdriver
and/or a rachet 5/16" (8 mm) for fine
adjustment d.
Important!
When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
–
Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
dimension 1 1/4" (32 mm). The guide
dimension of 1 1/4" (32 mm) is
related to a niche height of 84"
(2134 mm).
^
Check that the appliance is level with
the surrounding cabinets.
Note:
–
When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
–
If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
Installing the appliance
70
Attaching the appliance to the
installation niche
^ Open the appliance door.
^ Fasten the appliance on the left and
right hand sides with the 3 (supplied)
wood screws.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
Now connect the water supply to the
appliance (see "Plumbing").
Attaching the toe-kick cover
The maximum height of the toe-kick
cover is 4" (102 mm) from the top of
the floor. Do not cover the ventilation
slits in the plinth. Risk of damage to
the appliance.
^
If required, cut the toe-kick cover to
the required length and height.
^
Attach the plinth to the appliance,
and put the included cover plates in
place.
Installing the appliance
71
^
Attach the toe-kick cover to the
plinth.
Mounting the air separator
The air separator on the inside of the
freezer door keeps the supply and
exhaust air separate. This prevents
warm exhaust air from flowing into the
machine, optimizing the energy
performance of the unit.
^
If necessary, shorten the three parts
of the air separator.
^
Insert the foam pieces back into the
sides.
^
Open the freezer door.
^
Wedge the air separator at the
bottom of the freezer door, so it
connects in place.
Installing the appliance
72
Aligning the Ice/Water
Dispenser
If necessary the depth of the Ice/Water
dispenser can be aligned from inside
the custom door cut-out. This allows the
dispenser to be aligned with the
custom door to achieve the best
possible appearance.
,
Disconnect the appliance from
the power supply.
^
Press the dispenser back and pull
downwards to remove.
^ Remove the cover and the plastic
grill.
^
Remove the screw from the rear
casing, then lift the tab on the drip
tray up and off.
Installing the appliance
73
^ Pull the rear cover forward and out.
^
Loosen the water sensors and
carefully bend them upwards.
^
Carefully remove the drip tray using a
screwdriver if necessary.
Once the drip tray has been removed,
the four metal strips can be used to
align the Ice/Water Dispenser.
^
Loosen the screws of the four metal
strips.
^ Insert a screwdriver into one of the
four slots and push sideways until the
dispenser is aligned with the custom
door (the gray arrow will adjust to the
rear; the black arrow will adjust front).
^ Re-tighten the screws of the strips.
^ Insert the drip tray back into place,
then clip the water sensors back into
the position.
^
Replace the rear cover, panel and
screw.
^
Replace the drip tray and cover.
^
Finish by putting the plastic grill,
cover, and dispenser back into
place.
Installing the appliance
74
Attaching the frame and the
shelf
The word "TOP" is marked on the
rear of the frame at the top.
For
3
/
4
" (19 mm) thick custom doors:
^ Slide the cover frame onto the
Ice/Water Dispenser and press until it
is flush with the door front.
For 1
1
/
2
" / (38 mm) thick custom doors:
^
Fit the extension trim onto frame.
^
Fit the cover frame onto the Ice/Water
Dispenser and press it firmly into
position until it is flush with the door
surface.
Installing the appliance
75
All plumbing work should be carried
out by a suitably qualified and
competent person, in accordance
with all applicable local and national
regulations.
Disconnect the appliance from the
electrical power supply before
connecting it to the water supply.
Turn off the water supply before
connecting the water lines to the ice
cube maker.
The water quality must conform to
country requirements for drinking
water.
– The appliance is only suitable for
connection to the cold water supply.
– The water pressure must be between
25 and 80 psi (1.7-5.5 bar).
– A separate shut-off valve must be
installed, so that the water supply
can be interrupted as needed.
– The maximum outer diameter of the
water pipe (without fittings):
3
/
8
" (10 mm).
The shut-off valve for the water
connection must not be located
behind the appliance. It is
recommended to place the shut-off
valve directly next to the appliance
(base unit) or in another easily
accessible location.
Do not use pipe extenders.
In the event that the piping has to be
replaced only Original Miele Spare
parts are suitable for use. Contact
Miele.
Plumbing
76
Install a pressure limiting device and
water hammer arrester for inlet water
pressures exceeding 80 psi.(Refer
to Uniform Plumbing Code, Sections
608.2 and 609.10) Never install or
operate where inlet water pressure
may exceed 120 psi.
Preparing the water connection
The connection to the household
water supply must be installed
before the appliance is installed.
^
Turn off the main water valve to prevent
damage caused by leaking water.
^
Attach the connecting pipe to the
shut-off valve, according to the
instructions supplied by the
manufacturer of the ice cube maker
installation kit.
^ Install the connecting pipe. Always
observe the indicated clearance
dimensions to prevent damage to the
connecting pipe when pushing in the
appliance.
^
Secure the connecting pipe to the
floor with adhesive tape.
^
You may now proceed to install the
appliance. See "Installing the
appliance".
For appliances with a hose guide
^
position the device in front of the
niche and push the stainless steel
tube through the hose guide at the
back of the unit.
At this point the niche should be ready
for the appliance to be pushed back
into it (see "Installing the appliance").
^ You can now continue with the
installation.
Plumbing
77
Connecting the water supply
When connecting the water pipe to
the solenoid valve of the appliance,
follow the instructions supplied by
the manufacturer of the ice cube
maker installation kit.
When bending the water pipe, be sure
not to kink it, otherwise there is a risk of
leaks and water damage.
Use bending aids.
^
Remove the cap from the appliance
connection, 1.
^
Bend the water pipe to suit the
location of the connection on the
appliance, 2.
^
Push the union nut and seal onto the
water pipe.
^
Push the end of the water pipe into
the appliance connection and screw
on the union nut, 3. First tighten by
hand.
^
Then use an open-ended wrench to
tighten the union nut. Do not over
tighten.
^
Open the shut-off valve and the main
water connection. Check for leaks at
the connection for the shut-off valve
and to the appliance.
^ Turn the appliance on.
After a maximum of 10 hours the first
ice cubes will drop out of the ice
cube maker and collect in the ice
cube container.
Plumbing
78
,
Avoid the risk of electrical
shock
- Plug into a grounded 3-prong
outlet.
- Do not move the ground plug.
- Do not use an adapter.
- Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Improper connection of the
equipment grounding conductor
may result in electric shock. If you
are in any doubt as to whether the
appliance has been properly
grounded, have the appliance
checked by a qualified electrician or
service technician.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Before installing the appliance,
verify that the voltage, load and
circuit rating information found on
the data plate match the household
electrical supply.
If there are any questions regarding the
electrical connection of this appliance
to the power supply, please consult a
licensed electrician or call the Miele
Technical Service.
U1-800-999-1360
V1-800-565-6435
The appliance is supplied with a
UL-listed, 3-wire power cord and
NEMA 5-15 P plug ready for connection
to a 120 V, 60 Hz supply.
The fuse rating is 15 amps.
The appliance requires a 3-wire
receptacle.
The receptacle must be installed by a
licensed electrician only.
In the case of side-by-side installations,
a separate outlet must be used for each
appliance. Ideally, the power outlet
should be next to the appliance and
easily accessible. Do not connect the
appliance to the power supply by an
extension cord. Extension cords do not
guarantee the required safety of the
appliance (danger of overheating).
If any changes are needed to the
household wiring or power supply, this
work must be performed by a qualified
electrician.
Electrical connection
79
83
!
!
"
#
"
"#"$%#&
'"&"%
!$
%
(
)*+ !
&'& ,-*
, ./01,
""&#'
"'"'
"""
!+
"'"'#
"#%"%%$%
&
23415
4"2")6%
####%57!
M.-Nr. 10 605 900 / 06
en - US, CA
F 1473 SF
