Loading ...
Loading ...
Loading ...
22
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. Before you adjust
the reed switch, unplug the power adapter.
Using a small
standard
screwdriver,
carefully pry the
left Crank Cover
(25) off the left
Shield Cover
(24). Next,
remove the two
M5 x 20mm
Screws (53).
Then, rotate
the left Shield
Cover out of the way.
Note: For clarity, the left pedal and the left shield
cover are shown removed in the drawing at the
right.
Locate the Reed Switch (35). Rotate the Left Crank
Arm (100) until a Magnet (39) is aligned with the Reed
Switch. Next, loosen the Clamp Screw (A), slide the
Reed Switch slightly toward or away from the Magnet,
and then retighten the Clamp Screw.
Plug in the power adapter and rotate the Left Crank
Arm (100) for a moment. Repeat these actions until the
console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the parts that you removed.
25
53
24
39
100
A
35
Loading ...
Loading ...
Loading ...