Loading ...
Loading ...
Loading ...
4-6
E
N
O
TE:
@
The battery condition can be found by
checking the specific gravity of the electro-
lyte. However, you can also know the battery
condition roughly by measuring the voltage
at both battery terminals. Recharge the bat-
tery if the voltage is 12 volts or less.
Yamaha recommend checking the specific
gravity of the electrolyte and charging bat-
tery by a Yamaha dealer or a battery dealer.
If you maintain the battery yourself, read
carefully the instructions for the tool and
machine before maintenance.
@
Specific gravity of electrolyte
(for reference):
1.28 at 20 °C (68 °F)
EJU01149
Cleaning the watercraft
Clean the watercraft before storing it for a
long period.
1. Wash down the hull, handlebars, and
drive unit with fresh water.
2. Rinse the engine and bilge area with
fresh water. Drain off all water and wipe
up remaining moisture with clean, dry
rags.
3. Spray the engine’s exterior with Yamaha
Silicone Protectant and Lubricant.
4. Wax the hull with a non-abrasive wax
such as Yamaha Silicone Wax.
5. Wipe all vinyl and rubber components,
such as the engine compartment seals,
with a vinyl protectant such as Yamaha
Protectant.
6. Do not use protectant on the riding tray,
because it will make it slippery.
UF1N10.book Page 6 Wednesday, July 18, 2001 3:38 PM
Loading ...
Loading ...
Loading ...