Loading ...
Loading ...
Loading ...
25
During fill, the washer will pause occasionally to sense the water level. The washer will
check if the water level is correct by using a series of two different agitate strokes. A
slow stroke to sense the load and an agitate stroke to mix the load. (This may take over a
minute.) If the washer detects that the water level is not high enough, it will add more water
and re-check the level.
z
The levels marked on the agitator do not correspond exactly
to the level of the water. They indicate the level of dry clothes
suitable for the water level.
z
Your washer may occasionally add water during agitation. This
is to maintain the water level due to the release of air trapped
in the garments.
z
The medium/high and medium/low settings are available on the
WashSmart™ model only.
z
Out of balance loads, tangling or splash-over can be caused by
selecting a water level that is too high.
1
Place your clothes in the machine and select
the wash cycle. Press AUTO water level if not
automatically selected.
2
Press .
Water Level
Auto water level (WashSmart™ model only)
Manual water level selection
The agitator has five levels marked on its stem that can be used to help you select the
correct water level. Select the correct water level by using the mark nearest to the top of
the load.
WASH OPTIONS
Loading ...
Loading ...
Loading ...