Loading ...
Loading ...
Loading ...
Operation
15
15
Water Tank
Valve
Handle
Dispenser Pad
Cap
Cover
Cover
Bucket
1
3 4
2
Removable Glass Shelf
1. Lift the front of the removable glass shelf.
2. Pull the removable glass shelf toward door
direction about 14 Cm.
3. Lean the glass shelf slightly to one side.
4. Separate the glass shelf to designated place.
Decondensation
• Decondensation takes place automatically.
• The condensate water flows down to the
evaporating tray and is evaporated automatically.
Dispenser
1. Press the dispenser pad with a cup.
2. In The beginnig, push the pad(5 sec,3 times)
3. Remove the cup slowly from the pad to avoid
dripping water from the nozzle.
4. If slowly removing a cup from the pad, water
will not fall down.
ww
WARNING
Fill with potable water only.
Water Dispenser (Optional)
Filling of WATER TANK
ww
CAUTION
• Do not use other beverage (milk, juice,
carbonated beverage etc) than potable water.
Especially beverage including grain must not
be used (may result in failure).
•
When you fill water tank with water, please let
hot water cool before putting water tank in
refrigerator.
- Hot water cause malfunctioning.
How to Remove the Water Tank
• The assembly is the reverse of removal.
• Be careful not to press on with valve.
• When you assemble water tank on the door, be
careful to install certainly.
1. Pull out the water tank.
Then open the cap cover.
2. Water can be filled up to 2.3 liter.
3. After filling potable water. Close the Cap
Cover.
Loading ...
Loading ...
Loading ...