Loading ...
Loading ...
Loading ...
5
MODEL: RJ44
Operating Instructions
Before First Use
Before using the appliance for the first time, or following periods of prolonged storage,
it is necessary to clean the appliance thoroughly. See the Cleaning section. Before
switching on, make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
Using your Coffee Grinder
1. Lift the Hopper Lid off the Hopper. Place the desired quantity of coffee beans into the
Hopper, up to 80g. Replace the lid.
2. The Grinding Control Wheel on the left of the appliance is marked in increments of 2
and has 17 settings total. For coarsely ground beans, turn the wheel to 1. The higher the
setting, the finer the grind. (See Helpful Hints on page 7 for recommendations on the
correct grinds for the brew process you’ll be using).
3. Ensure that the Coffee Ground Bin is fully snapped into the grinder. Plug in the grinder.
4. Turn the front Quantity Control Dial to the required setting. For instance, if the dial is set
to 12, it will grind enough coffee to serve approximately 12 cups. This should be used as
a guide only, as it will vary depending upon preferred taste, type and roast of bean and
the grind selected.
5. Once you have both the Grinding Control Wheel and the Quantity Control Dial set, press
the On Button to start the grinder. The grinder will stop automatically after the set time.
You can also press the On Button at any time to stop it. After use, the appliance must
be unplugged.
6. Remove the Coffee Ground Bin and use the grounds as you desire.
Loading ...
Loading ...
Loading ...