Loading ...
Loading ...
Loading ...
Note: Passengers should not remain in your
vehicle when the vehicle is being jacked.
1. Park on a level surface, set the parking
brake and activate the hazard flashers.
2. Place the transmission in park (P) and
turn the engine off.
E175447
3. Block both the front and rear of the wheel
diagonally opposite the flat tire. For
example, if the left front tire is flat, block
the right rear wheel.
4. Lift and remove the carpeted load floor
panel to access the mini-spare and jack
kit.
5. Remove the steel winged washer nut
securing the spare tire by turning it
counterclockwise.
6. Remove the spare tire from the spare tire
compartment.
7. Remove plastic wing nut and jack and
lug wrench assembly. Detach lug wrench
from jack by turning the jack hex nut
drive screw counterclockwise.
8. Loosen each wheel lug nut one-half turn
counterclockwise, but do not remove
them until the wheel is raised off the
ground.
E242877
9. The vehicle jacking points are depicted
by arrows on the underside of the vehicle
at the locations shown above.
E201100
10. Find the arrows embossed on the
vehicle downward flange next to the
tire you are changing. Position the jack
so that the vehicle downward flange
rests in the jack saddle flange between
the arrows, as shown above. Raise the
vehicle by using the lug wrench to turn
the jack nut clockwise. Once the flat tire
is raised above the ground, remove the
lug nuts with the lug wrench.
376
MKX (CD9) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...