Loading ...
Loading ...
Front Matter
WARNING
Risk of fire. Highly flammable material.
W881
IMPORTANT: The electrical installation in the site shall
comply with the Australian Electrical Standards,
AS3000, SAA wiring rules, and such local regulations
that might apply. In Australia and New Zealand, installa-
tion must comply with the Gas Installations Standard
AS/NZS 5601 Part 1: General Installations.
The maximum drying load (dry weight) shall not exceed 8.2 kg [18
pounds].
Read all instructions before using unit.
WARNING
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or explo-
sion or to prevent property damage, personal injury or
death.
W033
WARNING
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any oth-
er appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occu-
pants.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s in-
structions.
• If you cannot reach your gas supplier, call the
fire department.
• Installation and service must be performed by a
qualified installer, service agency or the gas suppli-
er.
W052
IMPORTANT: Purchaser must consult the local gas sup-
plier for suggested instructions to be followed if the dryer
user smells gas. The gas utility instructions plus the
SAFETY and WARNING note directly above must be
posted in a prominent location near the dryer for cus-
tomer use.
WARNING
• Installation of unit must be performed by a qualified
installer.
• Install clothes dryer according to manufacturer’s
instructions and local codes.
• DO NOT install a clothes dryer with flexible plastic
venting materials. If flexible metal (foil type) duct is
installed, it must be of a specific type identified by
the appliance manufacturer as suitable for use with
clothes dryers. Refer to section on connecting ex-
haust system. Flexible venting materials are known
to collapse, be easily crushed, and trap lint. These
conditions will obstruct clothes dryer airflow and in-
crease the risk of fire.
W729R1
Front Matter
Part No. 514473R2
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 3
Loading ...
Loading ...
Loading ...