Loading ...
Loading ...
Loading ...
4-14
E
N
O
TE:
@
●
Wipe off any water on the spark plug or
inside the cap before installing the spark
plug cap. Push the spark plug cap down
until it is securely installed.
●
If a torque wrench is not available when
you are installing a new spark plug, a good
estimate of the correct torque is 1/4 turn to
1/2 turn past finger tight with the spark
plug wrench included in the tool kit. Have
the spark plug adjusted to the correct
torque with a torque wrench as soon as
possible.
@
WARNING
@
Be careful not to damage the insulator
when removing or installing a spark plug.
A damaged insulator could allow sparks
to escape, which could lead to an explo-
sion or fire.
@
EJU13021
Lubrication points
To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
●
Throttle cable (carburetor end)
●
Choke cable (carburetor end)
●
Throttle cable (handlebar end)
Pull the throttle lever and remove the
seal 1. Spray a rust inhibitor into the
outer cable. Refit the seal securely.
Recommended water resistant grease:
Yamaha Marine Grease/
Yamaha Grease A
E_F1N-10.book Page 14 Thursday, June 2, 2005 9:56 AM
Loading ...
Loading ...
Loading ...