Loading ...
Loading ...
Loading ...
13. TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 596 / 850 / 610
Electrical connection
1)
Voltage (V) 200 - 240
Frequency (Hz) 50 / 60
Wattage (W) 1550-2200
Water supply pressure bar (minimum and maximum) 0.5 - 8
kPa (minimum and maximum) 50 - 800
Water supply
Cold water or hot water
2)
max 60 °C
Capacity Place settings 14
1)
Refer to the rating plate for other values.
2)
If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐
gy), use the hot water supply to decrease energy consumption.
14. INSTALLATION
14.1 Fitting under a counter
The plinth of a freestanding appliance is
not adjustable. Do not remove the work-
top if you want to use the appliance as a
freestanding unit.
It is not necessary to remove the work-
top when installing under a standard
kitchen counter. Only remove the work-
top when installing the appliance under a
close fitting sink unit or kitchen counter
(820 mm).
Put the appliance adjacent to a water tap
and a water drain.
Make sure that the dimensions of the
recess agree with the dimensions in the
picture.
min 570 mm
600 mm
820 mm
Removing the work-top
1. Remove the rear screws (1).
1
2. Pull the work-top from behind (2).
2
3. Lift the work-top and move it from the
front slots (3/4).
4
3
4. Level the appliance using the
adjustable feet.
www.electrolux.com22
Loading ...
Loading ...
Loading ...