Loading ...
Loading ...
Loading ...
6”
(15
.2 cm)
Direct Wire–Route cable
3
Route cable from power supply through cabinet hole (cable must
extend to the right front side of cabinet opening).
Tape cable to the floor in area shown. This will keep cable from
moving when dishwasher is moved into cabinet opening.
Woo d
cabinet
Met al
cabinet
Power Supply Cord–Prepare hole
2
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797)
included with power supply cord kit.
¹⁄₂"
(1.3 cm)
Drill hole
1
Preferred locations
Preferred locations
Preferred locations
Optional locations
Optional locations
Optional locations
Drill a ¹⁄₂" (1.3 cm) hole in the cabinet side or rear.
Helpful Tip: Routing the water line through the left side of
cabinet opening will make water connection easier.
Hot water line
2
Measure water supply line
Measure overall length of copper tubing or flexible braided
water supply line. Attach to the hot water line using a
connection configuration that is in compliance with local codes
and ordinances. The water line to the dishwasher should have a
manual shutoff valve.
Prepare and Route Water Line
7
(1.9 cm)
Direct Wire — Drill hole
1
Preferred location
Preferred location
Preferred location
Optional location
Drill a ³⁄₄" (1.9 cm) hole in right-hand cabinet side or rear.
See product and cabinet opening dimensions.
Wood
cabinet
Metal
cabinet
Direct Wire–Prepare hole
2
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797
not included)
Helpful Tip: Wiring the dishwasher will be easier if you route the
cable into the cabinet opening from the right-hand side.
Option B, Direct Wire:
Loading ...
Loading ...
Loading ...