Loading ...
Loading ...
Loading ...
Scan List Name Name given to group of scanned channels
Available Channels Will list the channels available to scan
Scan Channel Member List of channels to be scanned
Priority Channel select Select the priority channel or ‘off’
Priority Channel 1 Sets which channel is priority 1
Priority Channel 2 Sets which channel is priority 2
Signaling hold time Sets the amount of time that the radio waits on an analog
scan list channel when a carrier signal of sufficient amplitude
is detected on the channel. This pause allows the radio to
decode the analog system signaling data. If the decoded
information is incorrect, the radio reverts to scan.
Priority sample time Sets the duration that the radio waits, when in a call, before
scanning the priority channels. If the call is taking place on a
Priority 1 Channel, no scanning will take place. When scanning
priority channels, the radio briefly mutes the current
transmission. Increasing this interval improves the audio
quality of the current transmission as fewer checks are done,
but this also increases the chance of the radio missing out
priority channel activity.
TX designated channel This feature defines the conventional channel/trunking
personality on which the radio will transmit if the user presses
the Push-to-Talk (PTT) button while the radio is scanning.
Note:
You can add the same channel to multiple scan lists.
16 write data to radio
After you have completed all the above steps, you can write the data to the DN-1701
radio.
BAOFENG DM-1701 CodePlug Programming Guide v1.1 - brought to you by Radioddity Page 30 of 30