Loading ...
Loading ...
Loading ...
8
6. Press PUSH to START to
begin cycle
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Shield feature to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
4. Set cycle settings and options
(on some models)
Select cycle settings and options by turning the knob to the
desired position.
TEMPERATURE/FABRIC (on some models)
Turn the TEMPERATURE/Fabric knob to change the drying
temperature setting. See “Setting the Drying Temperature”.
WRINKLE SHIELD FEATURE (on some models)
n
Get up to 40 minutes of heat-free, periodic tumbling at the
end of a cycle. Turn the WRINKLE SHIELD knob to select
ON or OFF at any time before the cycle has ended.
NOTE: Not all options and settings are available with all cycles.
3. Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Jeans*, Very Dry, ENERGY PREFERRED, or Less Dry
/Delicate automatically adjusts the dryness level at which the
dryer will shut off. Once a dry level is set, it cannot be changed
without stopping the cycle.
AUTOMATIC DRY cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: Jeans* is used for heavy fabric loads and removes
the most moisture. Very Dry removes load moisture and is
used for medium fabric loads. ENERGY PREFERRED is used
for a starting point for AUTODRY cycles. Choose ENERGY
PREFERRED for optimal energy savings. Less Dry/Delicate
removes less moisture and used for loads you may want to put
on a hanger to complete drying.
5. Select End of Cycle Signal
(if desired)
Turn the END OF CYCLE SIGNAL knob to select the desired
setting (On or Off). The End of Cycle Signal produces an
audible sound when the drying cycle is nished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield setting is selected and
the End of Cycle Signal is on, the tone will sound every
5minutes until the clothes are removed, or the Wrinkle
Shield setting ends.
Appearance may vary
* This option is only available on some models.
Loading ...
Loading ...
Loading ...