Loading ...
Loading ...
Loading ...
OPERATION
Using the Temperature Control Panel
This wine cooler has two cooling zones that are controlled independently
by two separate control panels: one for the left side zone and one for the
right side zone. Each zone has a temperature range from 40°F to 65°F.
The control panel in each zone will display the set temperature inside the
cabinet.
Press the button on the control panel to lower the temperature by 1
degree increments.
Press the button on the control panel to increase the temperature by 1
degree increments.
Press the button to turn the inner light on or off.
Press and hold the power button for approximately 3 seconds to turn the
unit’s power on or off. The Run Light will illuminate when the unit is
working.
The Celsius or Fahrenheit light will be lit depending on what scale
temperature is being displayed. To switch between C and F, press and
hold the and buttons at the same time for approximately 5 seconds
until the temperature scale changes.
Allow at least 24 hours before storing your wines and to allow the
temperature to acclimate.
Note: Whether your wine
cooler can reach the actual
set temperature depends on
the ambient environmental
conditions.
Caution: If you powered off
the unit, please wait at least
5 minutes before powering it
back on.
Power Button
Run Light
Temp. Adjust Up
Temperature Display
Light Button
Temp. Adjust Down
Loading ...
Loading ...
Loading ...