Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
34
4. Grill
4.1 To Replace the Grill Controller
Disconnect from electricity supply.
Lift up the hob and remove the control panel (see 1.1
and 2.1). Disconnect the wiring from the controller.
Remove the two screws holding the controller to the
mounting panel. Fit the new controller and reassemble
in reverse order. Check for correct operation.
4.2 To Remove a Grill Element
Disconnect from electricity supply.
Remove the grill pan from the grill compartment. Undo
the two screws and washers in the grill roof and remove
the enamelled front shield.
Undo the 2 screws and washers securing the grill
element front support. Remove the screws from the grill
elements.
Lift the elements out carefully and, noting their position,
disconnect the leads from the element terminals.
If it is not possible to disconnect the leads in this way,
pull the cooker forward to gain access to the rear. Undo
the screws securing the electric cover to the back sheet
and remove the cover. Disconnect the terminals from
the rear. Fit new elements and reassemble in the reverse
order. Check the operation of the grill.
5. Ovens
5.1 To Replace an Oven Thermostat
Disconnect from the electricity supply.
Lift the ceramic hob and remove the control panel
(see 1.1 & 2.1). Open the oven door. Remove the oven
furniture.
For the right-hand oven, remove the thermostat phial
cover (two screws). Unclip the thermostat phial from the
clips in the oven back.
For the left-hand oven, pull cooker forward to gain
access to the cover box at the rear of the cooker.
Remove the four screws securing the cover and lift clear.
Feed the thermostat capillary out of the oven.
Disconnect the wiring from the thermostat. Remove
two screws holding thermostat to mounting panel. Fit
new thermostat and reassemble in reverse order. Make
sure that the phial is clipped to the oven back with the
phial centrally positioned between the clips.
Check the operation of the thermostat.
5.2 To Remove an Oven Element Thermal Cut-out
Disconnect from electricity supply.
Pull the cooker forward to gain access to the cover
box. Undo the cover screws and lift clear. The cut-out
is located on the earth plate beside the oven element
connections. Disconnect the cut-out wiring. Undo the
xings that secure the cut-out to the earth plate and
remove. Fit the replacement control and re-assemble in
reverse order.
Loading ...
Loading ...
Loading ...